Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Hello!
So recently I have been spending far too many hunnids on refreshing my dashboard with Carling switches, so I would like to recover some cash by selling my past creations!!
First up, 3 genuine ARB switches £SOLD
Next, electric fan switch (25 amp) and wiring, complete with tidy loom to connect fans at the radiator, fuse holder etc.
Enough wire to mount fan(s) and switch on dashboard
Home made (wonderful quality) switch holder and very good quality switch.
£10 posted?
Engine start button and top quality home made 'engine start' plaque, 200 shape Disco dashboard ideally but otherwise just use the switch and wiring, enough wire here to reach the igntion switch wires from the dash pod. This proved a VERY handy mod!
£10 posted?
Heated screen switch and indicator lamp.
This is a standard 200 shape rear screen switch with the appropriate wires soldered on to supply a screen relay and indicator lamp which fits next to it
These could easily be used to another function, just remove the screen decal for the switch window!
This is a nice OEM way to switch a screen, some lights etc etc
£10 posted?
Winch control panel.
Momentary in/out switch with indicator lamp wired to show when winch is powered.
Made this panel up myself, very handy item, MUCH better than using a wander lead. You will need to extend the wires, but basically the red goes to the main power on the winch solenoid, then the silver and copper wires to to the in/out connections on the solenoid, in whichever orientation you prefer. Other than that, simply an earth to the panel for the lamp.
Nice red LED lamp, heavy duty switch with waterproof and MUDPROOF rubber cover!
£30 posted?
Let me know!
Cheers
So recently I have been spending far too many hunnids on refreshing my dashboard with Carling switches, so I would like to recover some cash by selling my past creations!!
First up, 3 genuine ARB switches £SOLD
Next, electric fan switch (25 amp) and wiring, complete with tidy loom to connect fans at the radiator, fuse holder etc.
Enough wire to mount fan(s) and switch on dashboard
Home made (wonderful quality) switch holder and very good quality switch.
£10 posted?
Engine start button and top quality home made 'engine start' plaque, 200 shape Disco dashboard ideally but otherwise just use the switch and wiring, enough wire here to reach the igntion switch wires from the dash pod. This proved a VERY handy mod!
£10 posted?
Heated screen switch and indicator lamp.
This is a standard 200 shape rear screen switch with the appropriate wires soldered on to supply a screen relay and indicator lamp which fits next to it
These could easily be used to another function, just remove the screen decal for the switch window!
This is a nice OEM way to switch a screen, some lights etc etc
£10 posted?
Winch control panel.
Momentary in/out switch with indicator lamp wired to show when winch is powered.
Made this panel up myself, very handy item, MUCH better than using a wander lead. You will need to extend the wires, but basically the red goes to the main power on the winch solenoid, then the silver and copper wires to to the in/out connections on the solenoid, in whichever orientation you prefer. Other than that, simply an earth to the panel for the lamp.
Nice red LED lamp, heavy duty switch with waterproof and MUDPROOF rubber cover!
£30 posted?
Let me know!
Cheers
Last edited:
