Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
Lol, who knows.
It's like when you're doing a Google search for the location of a cam sensor and end up watching narcoleptic dwarf goat wrestling on YouTube.
L322 V8 tap tap tap
- Thread starter Hamster97
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It's like when you're doing a Google search for the location of a cam sensor and end up watching narcoleptic dwarf goat wrestling on YouTube.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
oops, didnt quote, now its below i dont know how to get rid of this one so i am gonna put up a pic of Alan in his new car
Last edited:
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
I must have slept with the newer model then
Thank f*ck somebody wants to, i'd rather have a good sh1t
Last edited:
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I only did it out of spite.Thank f*ck somebody wants to, i'd rather have a good sh1t
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
I didn't think he would be your type mate
i think we may charged with bringing a thread into disrepute , again...
Back to you OP
i think we may charged with bringing a thread into disrepute , again...
Back to you OP
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
It helps with the depression caused by R/R ownership.I didn't think he would be your type mate
i think we may charged with bringing a thread into disrepute , again...
Back to you OP
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
Ok, it's been passed around a few garages but I settled on one 4 weeks ago simply because they said they would only charge for work done rather than pay for fault finding.
After curing 3 oil leaks, a water leak, taking cam lobe measurements, checking tappet clearances (no gap on any lifter) pushing the lifters with a tool making sure they all had similar/equal pressure the tapping problem has been narrowed down to vanos seals.
I've seen it mentioned that the vanos seals can be replaced without any cam locking kit but can't find instructions how.
Can anybody she'd any light on this?
Thanks.
After curing 3 oil leaks, a water leak, taking cam lobe measurements, checking tappet clearances (no gap on any lifter) pushing the lifters with a tool making sure they all had similar/equal pressure the tapping problem has been narrowed down to vanos seals.
I've seen it mentioned that the vanos seals can be replaced without any cam locking kit but can't find instructions how.
Can anybody she'd any light on this?
Thanks.
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
Leave me out of it, I own a Range Rover remember so my problem cup is overflowing lol.I didn't think he would be your type mate
i think we may charged with bringing a thread into disrepute , again...
Back to you OP
Can't beat a good bit of banter, as for bringing a thread into disrepute, that happened as soon as HC turned up lol.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
I shall try and stay on track..
I think this video is the one i watched about getting your cam locking kit from B&Q.
i am not sure of your budget but the kit below is really good value i think although i have never used one and easily resellable when your project is done.
I would be doing the timing chain guides while i was in there in which case you would need a 9 foot breaker bar to undo the crank bolt and the locking tool.
You may find the rattle is your timing chain guide, taking off the sump will give you a clue as very common.
http://www.ebay.co.uk/itm/131589044509
You could make one off these, i will be doing my vanos at some stage..
http://www.ebay.co.uk/itm/161280308528
Are you rebuilding the vanos with the beisan systems kit ?
http://www.beisansystems.com/products.html
http://www.beisansystems.com/procedures/m62tu_vanos_procedure.htm
I think this video is the one i watched about getting your cam locking kit from B&Q.
i am not sure of your budget but the kit below is really good value i think although i have never used one and easily resellable when your project is done.
I would be doing the timing chain guides while i was in there in which case you would need a 9 foot breaker bar to undo the crank bolt and the locking tool.
You may find the rattle is your timing chain guide, taking off the sump will give you a clue as very common.
http://www.ebay.co.uk/itm/131589044509
You could make one off these, i will be doing my vanos at some stage..
http://www.ebay.co.uk/itm/161280308528
Are you rebuilding the vanos with the beisan systems kit ?
http://www.beisansystems.com/products.html
http://www.beisansystems.com/procedures/m62tu_vanos_procedure.htm
- Posts
- 16,478
That's a damn good price for the Timing Locks....£155.....I paid considerably more for mine!I shall try and stay on track..
I think this video is the one i watched about getting your cam locking kit from B&Q.
i am not sure of your budget but the kit below is really good value i think although i have never used one and easily resellable when your project is done.
I would be doing the timing chain guides while i was in there in which case you would need a 9 foot breaker bar to undo the crank bolt and the locking tool.
You may find the rattle is your timing chain guide, taking off the sump will give you a clue as very common.
http://www.ebay.co.uk/itm/131589044509
You could make one off these, i will be doing my vanos at some stage..
http://www.ebay.co.uk/itm/161280308528
Are you rebuilding the vanos with the beisan systems kit ?
http://www.beisansystems.com/products.html
http://www.beisansystems.com/procedures/m62tu_vanos_procedure.htm
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
Hi Ant, it would probably sell for £100 when you are done as well, can't see it wearing out
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
I was going to spend 2.5k on an engine so I suppose that's my budget but would like to get it done for less. I have labour costs to deal with as well so that has to be included in the total spend. If the vanos isn't a big tear down, I would prefer to tackle the chain and guides another time but it's down to how much it'll be once the vanos is done. Cheers mate, good find on the video, helps a bit but not sure what the mechanic will make of it.
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
Found the timing kit a bit cheaper with free postage too, a bit more hunting round, maybe get it a bit cheaper http://www.ebay.co.uk/itm/161829533345
http://www.ebay.co.uk/itm/161829533345
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
Nice.
The vanos units to buy i think are around £350 each side and i think the beisan kit comes in at around £150 with the seals and tool. you can also send the units off for somebody else to swap out the seals.
i would buy the locking kit and sell it again after
The vanos units to buy i think are around £350 each side and i think the beisan kit comes in at around £150 with the seals and tool. you can also send the units off for somebody else to swap out the seals.
i would buy the locking kit and sell it again after
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
I'll buy the kit but probably keep it as I also have an E39 M5 with the S62 engine. Hopefully won't need it lol.
Next update soon I hope.
Next update soon I hope.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
Keep us posted mate, I'll buy it off you if not(the timing kit, not the Rangey ), it's about time I started messing with the engine, I've had just about everything else apart
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
Lol, no worries mate, you've got 1st dibs
