cmryan
Member
- Posts
- 41
- Location
- Lytchett Matravers, Dorset
Hi all,
I'm considering converting my Defender 90 (1993) to automatic. It's already a mongrel, with a P38 4.6V8 GEMS engine mated to a LT85 gearbox. The drive shafts rubn down the right side to Disco 1 axles.
I'm thinking of putting in an 4hp22 autobox but want to make sure the bellhousing and input shaft are correct to mate to the engine.
Which box should I look for (ie from which vehicle)
Do I need one with an ECU or manual kickdown?
Will my transfer case with outputs to right side mate to a P38 automatic box (4HP24) where the outputs are to the left?
It's all twisting my man!
Thanks
I'm considering converting my Defender 90 (1993) to automatic. It's already a mongrel, with a P38 4.6V8 GEMS engine mated to a LT85 gearbox. The drive shafts rubn down the right side to Disco 1 axles.
I'm thinking of putting in an 4hp22 autobox but want to make sure the bellhousing and input shaft are correct to mate to the engine.
Which box should I look for (ie from which vehicle)
Do I need one with an ECU or manual kickdown?
Will my transfer case with outputs to right side mate to a P38 automatic box (4HP24) where the outputs are to the left?
It's all twisting my man!
Thanks