blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,465
- Location
- Gloucestercotshirewolds
+1 let us know if you need help
Urgently need a new hub
- Thread starter the_wolf
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
+1 let us know if you need help
- Posts
- 10,639
- Location
- Oxfordshire
aye, good luck!
i'm about this weekend if everything goes breasts up
i'm about this weekend if everything goes breasts up
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
Hi,
Just seen this if you need any other help, let me know.
I'm sure by now you have my mobile on speed dial
Just seen this if you need any other help, let me know.
I'm sure by now you have my mobile on speed dial
Allyipod
Active Member
- Posts
- 887
- Location
- NE of Glasgow 15 miles
Any news yet... Pic's
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
dropped him a text 5 mins ago but no response - yet
Allyipod
Active Member
- Posts
- 887
- Location
- NE of Glasgow 15 miles
Prob down the pub by now. But as a matter of interest how do the studs attach Are they knock out with splines or do they have a thread and if so it must be LHT I would think...
- Posts
- 10,639
- Location
- Oxfordshire
series had screw in then changed to splines, so i guess fenders are all splined now.
you knock just knock em out (can take some effort though)
Allyipod
Active Member
- Posts
- 887
- Location
- NE of Glasgow 15 miles
- Posts
- 10,639
- Location
- Oxfordshire
Thought that so bash bash bash bash bash what is taking him so long.....
i think you need to take the disc off, can't remember though
- Posts
- 10,639
- Location
- Oxfordshire
no doubt he will have mushroomed them too since he cant put a nut on
Allyipod
Active Member
- Posts
- 887
- Location
- NE of Glasgow 15 miles
no doubt he will have mushroomed them too since he cant put a nut on
Yea just having a laugh I'm sure he will get it sorted...
Allyipod
Active Member
- Posts
- 887
- Location
- NE of Glasgow 15 miles
Would it make that much difference if it was just to get you home?
Allyipod
Active Member
- Posts
- 887
- Location
- NE of Glasgow 15 miles
Need to get off to bed now as up at 5am if still needed text me on my phone... All the best.
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
He's alive
Text to say its sorted (eventually)
No doubt he'll be along shortly
Text to say its sorted (eventually)
No doubt he'll be along shortly
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
I am. Cheers for the **** taking before you know I'm alive . Well I've got two theories. Either the tyre place cross threaded the nuts which is damn hard to do unless you're a total fool; or someone deliberately loosened the nuts . Take a look at the studs and you'll see why I think that
. Well I've got two theories. Either the tyre place cross threaded the nuts which is damn hard to do unless you're a total fool; or someone deliberately loosened the nuts . Take a look at the studs and you'll see why I think that
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,465
- Location
- Gloucestercotshirewolds
Sorted?
A few people have had nearside front come loose an feld orf
A few people have had nearside front come loose an feld orf
ratty
I'm not special I'm limited edition
- Posts
- 34,277
I am. Cheers for the **** taking before you know I'm alive
Did you re-check the wheel nuts after the tyres were fitted?
