Urgent -- Immobiliser

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

Colin2014

New Member
Posts
11
Hi, not sure if anyone local who can help?

I've just had a button soldered back on my key fob for my 97 300tdi
Struggling to get hold of the guy who did the repair.
My keyfob has lost all sync with the car and will not disable the immobiliser.

Is there anyone who can come and programme my fob close to Rochdale? I can pick you up in my van if local?

For cheap/beer tokens?
Or if it's a service I need to pay for I can do so.

Please help car is stuck and cannot start.

Thanks in advance!
 
Well outside my (tiny) field of knowledge but think you can re-sync....something along these lines

stchris356 said:
Pressing the battery would not resolve a battery problem!
You'll probably find the soldered connections on the PCB where the battery carrier is connected have broken and need re soldering as when you press the battery this is making the contacts connect again!
Re-solder the connections then press both buttons several time and it should re-sync, if not disconnect the vehicle battery for 10 mins and repeat pressing the remote buttons!
Hope that helps!
Click to expand...
 
Or maybe....

discool said:
Starting with the fob and assuming it isn't faulty should have a good quality battery fitted, to resync the fob to the system press the lock button a lease 4 times and you will find the central locking system will lock/unlock. Fobs can go faulty and loose their tuning but can be refurbed. Key Fob Reconditioning

To remobilise the engine the fob should be near the ignition switch and will unless you have a problem with the immobiliser 'spider' and if there is, the spider can be bypassed.
Click to expand...
 
B/B - although not rocket science, and commonish knowledge - can I suggest we remove Yellow90's helpful posts on how to steal, errm, i mean disable the immobiliser on a landy from the forum? Such information might be best kept to PM's?
 
The Mad Hat Man said:
still no response from Colin or Lewis?
Click to expand...

I'm here! If Im willing to help if there's anything I can do, no knowledge of landy immobilisers though. Have got a snapon ethos not sure if it will code fob though. If nothing else I know a couple of local garages who may be able to do it.

Lewis
 
You must log in or register to reply here.

Similar threads

F
Disco 1 Immobiliser issues
Replies
11
Views
1K
discool
discool
A
Need someone with a nanocom
Replies
5
Views
806
marjon
marjon
L
Disco 3 (LR3) Discovery 3 cruise control
Replies
4
Views
376
LR-hobbs
L
stevenson_94
Freelander 1 PSCAN
Replies
13
Views
815
andyfreelandy
andyfreelandy
F
110 key / immobiliser issue help
Replies
3
Views
561
Fistofsteel
F
Back
Top