Urgent help needed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

freelandermad

New Member
Posts
72
Location
Fife Scotland
Guys am stuck at side of road and rangey 96 DSE Manual sitting on bump stops....
ive got tools / cable / jack etc etc all in the car how the f*k can i get this to raise or over ride to get me home...???
I tried moving it but no way can i risk 30+ miles coz i think by sounds of it that its hittin plastic arches.
EAS fault on dash 35mph and all light flash & then go solid
Cheers
 
Whereabouts are you stuck, someone maybe close by who can help out!

By the sounds of it, the system is in hard fault (message on dash and all the lights lit) the only way is via diagnostics!

Now, whilst it might seem like it is banging on the arches, unless you have stupid big wheels, it isn't rubbing on anything.

The P38 os fitted with rubber bumpstops mounted on the chassis above the axles....so when she does sink to the floor, she sits on these rubber bumps...

If it is safe to do so, pop out of the car and take a look to make sure yours are still fitted! they look like large rubber bullets.

Whilst the ride will be very bouncy and uncomfortable, and aslong as you keep it below 30mph, you can drive home on the bumps, this is what they are designed for, motorway speeds are dangerous on the bumps as she will bounce around, so must be avoided it at all possible....

If your bumps are missing, and the axle is pretty much on the chassis, then you'll need to be recovered!

ANR2556.jpg
 
His previous posts would indicate that he's around Fife in Scotland. But, of course, unless he tells us, it's going to be a bit difficult helping him.
 
Saint.V8 said:
Whereabouts are you stuck, someone maybe close by who can help out!

By the sounds of it, the system is in hard fault (message on dash and all the lights lit) the only way is via diagnostics!

Now, whilst it might seem like it is banging on the arches, unless you have stupid big wheels, it isn't rubbing on anything.

The P38 os fitted with rubber bumpstops mounted on the chassis above the axles....so when she does sink to the floor, she sits on these rubber bumps...

If it is safe to do so, pop out of the car and take a look to make sure yours are still fitted! they look like large rubber bullets.

Whilst the ride will be very bouncy and uncomfortable, and aslong as you keep it below 30mph, you can drive home on the bumps, this is what they are designed for, motorway speeds are dangerous on the bumps as she will bounce around, so must be avoided it at all possible....

If your bumps are missing, and the axle is pretty much on the chassis, then you'll need to be recovered!

ANR2556.jpg
Click to expand...

Mines is definitely rubbing in the plastic wheel liners lol... can see it on the tyres where its made contact
 
Sorry mate not anywhere near or i would help out. If you havent got it already, you should really get the eas kit from DATATEK. Give him a shout and he will sort you out. Its not expensive and is really invaluable.

Cheers Rob
 
rangerob said:
Sorry mate not anywhere near or i would help out. If you havent got it already, you should really get the eas kit from DATATEK. Give him a shout and he will sort you out. Its not expensive and is really invaluable.

Cheers Rob
Click to expand...

Cheers mate i think i will be aqquiring this eas thingy but it's no good when am at side of the road just now lol
f8kn stupid things..... be quicker fitting coil springs on it!!
 
rangerob said:
How far you got to get? if its on the stops you can stilll drive it but not fast. Its not comfortable but will get you home.
Click to expand...

Theres no way i'm risking it, it is rubbing on wheel liners and i have a dual carriageway between here & where im heading too so logically it would be mental to attempt lol... and 2ndly i doubt police would be chuffed
 
can yu fit some wooden blocks on bump stops to act as spacers?

how about someone following as shotgun?

unlikely to be fixed where it is, so it will have to be moved some distance...

ideas?
 
I think theres a way to get the pump to run. you insert some wire in the relay terminals i think............... let me see if i can find the thread.......... i might be wrong so dont get your hopes up dude.
 
I was just thinking the wooden block idea. Does the op have straps in his car? Any idea where hes going to or just trying to get to safer place
 
You must log in or register to reply here.

Similar threads

D
P38A Pesky EAS!
2 3
Replies
51
Views
4K
Digweed
D
K
Air suspension prob i can find no info on
Replies
6
Views
610
kevseabass110
K
M
Disco 2 Urgent SLS advice needed
Replies
7
Views
2K
MrIFan
M
CJMoore
EAS Fault
Replies
3
Views
682
CJMoore
CJMoore
Nodge68
Freelander 2 (LR2) LR trouble codes.
Replies
6
Views
34K
Keith Kernow Kernewick
Keith Kernow Kernewick
Back
Top