kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
I've got a new crank position sensor.Crank position sensor is common, also check the coolant temp with diag as the sensor can fault to 140c and stop the motor running..
*Urgent* D2 V8 Thor 4.0 won't start.
- Thread starter kurgan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
Still to be fitted.
- Posts
- 34,073
- Location
- North Shropshire
it definitely unscrewed but i never tried it, maybe someone modified itI tried to unscrew it, just a blank on mine could of been different on yours,
Henry_b
Think outside, no box required.
- Posts
- 15,522
- Location
- somewhere else
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
Can someone stick an arrow on the pics so I know where to look. Thanks.
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
Yes my replacement one is a genuine Bosch. Not a chinese-ium Knock off.My money is on the crank sensor..
- Posts
- 34,073
- Location
- North Shropshire
It's the sticky up thing at the rear, pointing towards the bulkhead
So more digging
www.landyzone.co.uk
J
thor 4.6 v8 wont start properly ???
hi lads , I have a 2000 model 4.6 v8 thor engine petrol/lpg . had car for 4 yrs usually starts 1st button last 4 weeks wont fire up 1st thing in morning ????????? its taking 4/5 turns to fire up then ok all day .. in last week had new battery fitted ????? still same :mad::mad::mad: had...
www.landyzone.co.uk
Attachments
- Posts
- 34,073
- Location
- North Shropshire
Maybe @Henry_b is the one with the dodgy rail that's been blanked offSo more digging
*Urgent* D2 V8 Thor 4.0 won't start.
Urgent Help, my wife's D2 V8 was running perfectly last week. We've spent a lot of money replacing the engine and having some preventative welding done. As of 2nd Jan it will crank but won't start. Battery was replaced yesterday 8/1/24. Turning the key the the battery light is on and the check...
J
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
Thanks very much.So more digging
*Urgent* D2 V8 Thor 4.0 won't start.
Urgent Help, my wife's D2 V8 was running perfectly last week. We've spent a lot of money replacing the engine and having some preventative welding done. As of 2nd Jan it will crank but won't start. Battery was replaced yesterday 8/1/24. Turning the key the the battery light is on and the check...
J
- Posts
- 34,073
- Location
- North Shropshire
for a bit more context
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
The big silver sticky out bit?
Henry_b
Think outside, no box required.
- Posts
- 15,522
- Location
- somewhere else
yes on mine you can't do anything with it, it's a blank.The big silver sticky out bit?
CPS most likely, if in doubt pulling a plug or 2 will be far quicker than pulling the upper intake off..
JUKE179r
Well-Known Member
- Posts
- 3,166
- Location
- Suffolkshire
Here you go…
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
***Update*** still won't start - I now have access to a nanocom for a D2 V8 - does anyone have a step by step guide of what I should be looking for going through the nanocom options. When plugged in it keeps coming up with an intermittent error - issues connecting to ECU. Any help would be appreciated as the wife has said if its not fixed soon- scrap it. I also have a paired ecu and bcu with eka code from a donor car.
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
Got a Nanocom to borrow, no fault codes in engine or gearbox. Still won't start.
- Posts
- 34,073
- Location
- North Shropshire
are you getting a spark at the plug? are you getting fuel? (is the plug wet?)
kurgan
Active Member
- Posts
- 638
- Location
- Aberdeenshire
I'm going to check that this weekend. I'll ask my neighbour for help.
Hey would a faulty crank sensor show up as a fault code?My money is on the crank sensor..
Similar threads
