Transit engine into 84 SWB CSW Petrol

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

luggsey

Active Member
Posts
209
I'm thinking of fitting my Transit engine into my 1984 SWB County 2 1/4 petrol. I already have a rusting transit with a good engine, I have been told it's a good mod with the correct ammount of power, anybody had a Landy with this sort of motor fitted?
The mod sounds ok but:
Does the petrol pump have to be used or does the transit lift pump do the business?
What exhaust do I use? Will the petrol one work or will I need a landrover 2.5 diesel one?
I suppose I need a return pipe for the diesel?
Any suggestions (sensible!) welcome.
 
I'm not worried about the speed, mine is used on the farm dragging trailers over fields etc. Has skinny mud plugger tyres and early axels without anti-roll bars. Go fast=brown pants!
I want to use bio-diesel (my own mix!) so a high tech engine is a no no.
So forget about road performance, would it tow a 2.5 tonne trailer (slowly!!) with more go then my crap 2 1/4 which could not be worse on hills and petrol consumption at last check 33 miles on a third of a tank!!! (Towing). I don't have enough cash to by another lump as the engine kit is already expensive enough.
 
Thats a Massey 35, if u know what it is u know why I wanna take the landy. 35 has aircon, no cab! Nuff said?
 
I do use it for slow speed roadwork with the trailer as well, should have made that clear...
 
Funny you should say that, other people are saying the Transit lump has little low down torque?????
All depends on who I speak too!
Anybody know if the petrol pump on my petrol landy is the same as the diesel one?? I suppose the filter would be different.....
 
Back
Top