Trailer - challenge truck build

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I gotta sort out my harnesses I only want a lap belt for trialling but use full harness for comp I have a new set but think 3 points are now banned for comps :-(
 
Nice chairs those with the land rover print, have used the whitbread seats in anger now and can confirm they are still comfy, bizarre I know.

Washing them with the hosepipe and jumping straight in the chair is another bonus! :D
 
Cage is on :D :D
CD1CBB8E-97F8-42A7-860D-9325A165447A-5345-000004318135EDD4.jpg


631744A1-A7BF-4E8D-89C3-704B16CEC809-5345-0000043177600309.jpg


B559FEA7-9F55-4166-8257-CC941696EC23-5345-00000431641DACCD.jpg


Everything fits brilliantly as it should ;) just gotta drill 2 more holes and she's done :)
 
Seats placed in position very good fit only might raise the backend a little to make using the clutch easier but apart from that I'm really happy :) although they're abit of a pain to get into :rolleyes:
DE565FDA-A0D5-46CE-BE99-4E902AB1DD35-5681-00000454FA7AB7D7.jpg
 
The wiring I'm running to the back
D3E2D46D-5364-4409-855E-EF72D5301982-708-0000003B7F84536C.jpg


Going through the chassis for protection and it's plastic covered to stop rubbing problems unlike standard that's sort-of wrapped in duct tape at bits. It's 13 core but I only need 7 or 8 so I've got a few spare if I need them, lights are on order as is the new fuse box which is going behind the seats on the bulkhead I think I've got my head around the wiring co it should be a case of extend, improve and all should be good :)
 
The wiring I'm running to the back
D3E2D46D-5364-4409-855E-EF72D5301982-708-0000003B7F84536C.jpg


Going through the chassis for protection and it's plastic covered to stop rubbing problems unlike standard that's sort-of wrapped in duct tape at bits. It's 13 core but I only need 7 or 8 so I've got a few spare if I need them, lights are on order as is the new fuse box which is going behind the seats on the bulkhead I think I've got my head around the wiring co it should be a case of extend, improve and all should be good :)

Label, label, label and write it in a book. :)

Because if you dont you'll forget it all at a later date and snip the wrong **** i guarantee you. :( especially if your using non LR colour codes on your cable.

good luck.
 
Label, label, label and write it in a book. :)

Because if you dont you'll forget it all at a later date and snip the wrong **** i guarantee you. :( especially if your using non LR colour codes on your cable.

good luck.

That's me plan ;) although I've got continuity testers and power probes do I can work out pretty well :) the colour coding won't be LR just too much Farse getting all the right individual wires there's nothing that technical really it's only a 1987 90 it's not like there's evu's or anything to mess up :p
 
Ow you will make MHM's day Lol!!

I'd do the same aswell although I did find a place propper cheap for wire online and £3 delivery charge i got loadsa wiring any colour you want 27A continious £0.64 a meter lesser A forl less £££ aswell
 
You could use 3 of them to control the winch solenoid from in the cab. If you not going wireless that is.

Ow you will make MHM's day Lol!!

I'd do the same aswell although I did find a place propper cheap for wire online and £3 delivery charge i got loadsa wiring any colour you want 27A continious £0.64 a meter lesser A forl less £££ aswell

Where's that? :cool:
 
Back
Top