Torx bit sizes for FL1?

AndrewH · Dec 17, 2019

Hi again folks. Do the interior fittings (door trim, fascia fixings etc.) all use a single size of torx driver or will I need a selection of them? I have had a little mooch around (in the dark) inside my recently acquired pre-facelift TD4 3DR and what I've come across so far all seems to be standard torx, maybe T30 or perhaps 40 but I've not had time to check further. I don't want to set about doing little jobs and find myself stymied by not having some weirdo yet essential type of obscure bit! Thanks

TSR2 · Dec 17, 2019

Pretty sure T20 features a bit.

AndrewH · Dec 17, 2019

TSR2 said:
Pretty sure T20 features a bit.

Thanks TSR. Are all the Torx sizes likely to be standard 6 star without the annoying security bit in the middle that stops you using standard Torx bits?
I've got a set of the normal Torx bits but not the security ones.

Nodge68 · Dec 18, 2019

The size of the Torx bit used, depends on the size of the fastener thread. It's best to get a set, so you can undo everything you need.

J_D · Dec 18, 2019

Not found any security ones on the car.

Torx bit sizes for FL1?

AndrewH

Member

TSR2

Active Member

AndrewH

Member

Nodge68

Well-Known Member

J_D

Well-Known Member

Similar threads