- Posts
- 83,266
- Location
- Embasinga stocæ
And the inside looks a bit cleaner now......
A week ago....
Yesterday.......
Today.....
Last edited:
The resurrection of Tufftee - Part Deux :o
- Thread starter The Mad Hat Man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,266
- Location
- Embasinga stocæ
Don’t she look lovely in black?
- Posts
- 83,266
- Location
- Embasinga stocæ
And a bit of easy fabrication.....
Still got to decide what to do with the remaining floor part.... remove from donor floor or manufacture from scratch.
Still got to decide what to do with the remaining floor part.... remove from donor floor or manufacture from scratch.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Good god, while I was pouring concrete on my own until half 7 tonight you were a very busy boy 
Fab it up out of that 1.2 zintec.
What we doin Friday? Is there going to be anything left for me to do?
How did you get on with the welder settings?
Fab it up out of that 1.2 zintec.
What we doin Friday? Is there going to be anything left for me to do?
How did you get on with the welder settings?
- Posts
- 83,266
- Location
- Embasinga stocæ
i was finking... that the floor should be 2mm as it takes a hell of a pounding.
the side panel - need to have a chat about it....
Didnt do any weldering today. There is still things to do friday, like eat lasagne
the side panel - need to have a chat about it....
Didnt do any weldering today. There is still things to do friday, like eat lasagne
- Posts
- 9,105
- Location
- Roaming the UK on assignments
- Posts
- 83,266
- Location
- Embasinga stocæ
Not much the last couple of days. A bit more paper cutting and lots of dozing and keeping cool in the shade.
Maybe some more activity tonight.
I think the sill supports need cleaning up on the car prior to sill fitment.
Maybe some more activity tonight.
I think the sill supports need cleaning up on the car prior to sill fitment.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Do you mean the body mount outriggers on the chassis?
Or is the heat really cooking my fragile little brain today?
- Posts
- 83,266
- Location
- Embasinga stocæ
Yes
Last edited:
- Posts
- 83,266
- Location
- Embasinga stocæ
Not much (No) actual work tonight, but plans made for the next week.....
Remove more floor section, cut out replacement floor section from donor floor.
Manufacturer inner panel for A pillar and triangular front floor section from 2mm Zintec.
Cut OS sill box section and weld on end plates. Maybe tack on front sill mount.
Remove more floor section, cut out replacement floor section from donor floor.
Manufacturer inner panel for A pillar and triangular front floor section from 2mm Zintec.
Cut OS sill box section and weld on end plates. Maybe tack on front sill mount.
Last edited:
- Posts
- 83,266
- Location
- Embasinga stocæ
Drain fuel tank, ready for removal.
Clean up NS chassis outriggers and ns rear quarter panel
Clean up NS chassis outriggers and ns rear quarter panel
- Posts
- 83,266
- Location
- Embasinga stocæ
Donor inner floor = stage 1
Removed from outer floor section. Now needs prepping and cutting to size.
Removed from outer floor section. Now needs prepping and cutting to size.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
See, this cooler weather has inspired you, it's mint that and it's gonna fit in there a treat to rid that pitted section!
- Posts
- 83,266
- Location
- Embasinga stocæ
Cooler yes..... p|ssistantly raining don’t !
- Posts
- 9,105
- Location
- Roaming the UK on assignments
I'm moving boxes into the self storage place again today, really not looking forward to it and I can only pray they let me back up into the unloading bay if it's still pizzing it down when I get there.
I am dying to start the dismantling of the back end for repair but next weekend is also good for me, it's supposed to dry up in the week just in time for cleaning up those outriggers and painting them and cutting out that rotten old floor section, do you have a CO2 extinguisher for the welding up?
- Posts
- 83,266
- Location
- Embasinga stocæ
I have several CO2 extinguishers, water ones, dry powder and even the odd Halon one.
Most are now date expired but still fine to use.
Most are now date expired but still fine to use.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Good, prefer CO2, is HALON still legal? Thought it had been outlawed due to it's (supposed) affect on the O-zone layer?
- Posts
- 83,266
- Location
- Embasinga stocæ
No.
but it is very good . I keep them for small expensive fires. Not needed one yet . If I get a suitable fire, Ozone is last of my worries.
- Posts
- 83,266
- Location
- Embasinga stocæ
- Posts
- 68,186
- Location
- The Wooly Witch
Today is National Lasagne Day ....
