I have just checked the Foxwell site for the NT530 and it does have software for Citroens. Looking at the coverage
here; it looks at if the C3 Pluriel is covered. Are you sure it is not available on the 520?
We seem to be getting mixed messages, somehow. But yes, that is what Foxwell said to me, that, yes, it is available for my 520. So I was, until yesterday, sure it could be done!
Don't feel the need for it at the mo, but will look at it and also mention it on the C3 fora, as they all try to go with another thing, Lexia, that needs to be run on an older 32 bit computer. This is sadly now older tech, although we do have one older laptop it could prolly run on, but is not connected to the internet.
Whole thing is a pain in the rear and makes me pine for the days when all you had to do was make or buy the odd special tool!
However, having looked at what it can do there are some big holes, for instance nothing at all about the clutch actuator which is deffo summat I'd have hoped to see as that is necessary if you are going to change the clutch on the Sensodrive.
But yes there is useful stuff there. Thanks for finding this for me. Very grateful.