Td4 Egr Bypass Pipes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

Roverron

New Member
Posts
82
Location
Scotland
You can now buy an egr bypass pipe from
[email protected].

Jointly developed by Dave and yours truly, it is a quick bolt on job and offers the following advantages:

No more crud build up on the assembly
Reduced smoke, especially on tuned engines
More power thanks to much better airflow.

Price £49.50 delivered direct from Dave.

(Another company has been selling these for the TD5 Landrovers for £55)

Also fits the 75/ZT/BMW 320D

I have been using one on my 75,as have a ZT owner and a BMW 320d owner so we can vouch for the effectiveness.

Ron
 
ming said:
whot do it do. . . . ron ron da do ron ron. . . . .:)
Click to expand...
Well you must have seen how much gunge accumulates on the egr valve innards and how big an obstruction to the airlfow the valve mechanism is.

There are photos on my website here:

75ZT HOME

So the bypass is an egr lookalike, but with the exhaust supply blanked off and a smooth unobstructed path for the intake air. Its a direct & reversible swap. Also fits the 320D, 75/ZT.

So no more gunge and much better airflow.
This liberates a bit more torque by improving the combustion and reducing smoke as a result.

Apparently another company has been doing them for the TD5s (for £55) with similar benefits.

Ron
 
clutchdust said:
£49.50!!!!!! Just pull the vacuum pipe off and plug it.... totally free
Click to expand...


You've missed the point.

We aren't talking about disabling the egr valve, we all know how to do that.
We're talking about removing the obstruction that the egr valve mechanism presents to the air flow with obvious and proven benefits over and above what disabling it offers.

Ron
 
Roverron said:
You've missed the point.

We aren't talking about disabling the egr valve, we all know how to do that.
We're talking about removing the obstruction that the egr valve mechanism presents to the air flow with obvious and proven benefits over and above what disabling it offers.

Ron
Click to expand...
Mmmmmmmm............
 
yella disco said:
ffs heidi, you as well 8, leave poor old ron alone, it must be hard, avin a market stall in albert square one day, on the dole the next, give the man a break, ere ron, you still got that old sheepskin coat ;)
Click to expand...

If you have don't wear it near yella. his eyesights not as good as it was an he might mistake you for a sheep.
 
Photo of the egr pipe.

As you can see, a lot of work goes into making them.
75/Zt owners who have been fitting them this wekend have all said the improvement is noticeable, wiht more torque and reduced or eliminated smoke with a Tu3 or Synergy on max.

Ron
 

Attachments

  • egrnew.jpg
    egrnew.jpg
    13.3 KB · Views: 544
Once EGR By-Pass is fitted is it important to blank of the vacom pipe? I did this when I fitted EGR By=Pass to my TD4 and after day or so the engine mades a whinning sould as if a motor war spinning free and slowing down. Any ideas?
 
You must log in or register to reply here.

Similar threads

S
Egr td4 bypass valve kit
2 3
Replies
54
Views
44K
hd3
hd3
Back
Top