I want o install this switch panel on my 1989 land rover defender 90 and I'm not sure where I can install as I originally wanted to install near the dash but I also thought about installing it in the cubby box any help or ideas on how to go about installing it in a place that is practical.
Switch panel installation
- Thread starter dessie85
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I want o install this switch panel on my 1989 land rover defender 90 and I'm not sure where I can install as I originally wanted to install near the dash but I also thought about installing it in the cubby box any help or ideas on how to go about installing it in a place that is practical.
Anaconda
Well-Known Member
- Posts
- 4,894
- Location
- Thames Valley
Why don't you cut out a cardboard template and trial fit it in various places.
I think I would find a suitable cubby box and fit it to the front, or even make your own cubby box.
I think I would find a suitable cubby box and fit it to the front, or even make your own cubby box.
I was thinking of putting in a cubby box I don't have one at the moment. I appreciate your help. Thanks.
Hicap phill
Well-Known Member
- Posts
- 16,866
- Location
- Wiltshire
As long as the switch’s are not important a cubby box will be fine. Reason… you won’t be able to see the switches when you use them.also make sure the cubby box does not have cup holders to interfere with switch’s/usb cables.
Search mud dash items. These mount in the centre of the dash
Cheers appreciate that. I'll check out mud dash items see what I find
marc.postle
Member
- Posts
- 41
- Location
- suffolk
I ended up putting my switches in a MUD dash pod
www.mudstuff.co.uk
Just a word of warning about the item in the picture, i got one of those to install in the back in a custom shelfing box i built and i found a few of the crimps were loose on the prewired harness.
Before you start with it, i would recommend recrimping everything or try pulling the wires to just check, last think you want is a live wire rattling around in the dash
MUD Pod
The Mud Pod provides a neat and simple to install solution for competition users, expedition vehicles and emergency vehicles whose requirements demand additional dashboard space in order to accommodate auxiliary controls. External Dimensions (L) 340mm x (D) 109mm x (H) 80mm The Recessed facia...
www.mudstuff.co.uk
Just a word of warning about the item in the picture, i got one of those to install in the back in a custom shelfing box i built and i found a few of the crimps were loose on the prewired harness.
Before you start with it, i would recommend recrimping everything or try pulling the wires to just check, last think you want is a live wire rattling around in the dash
Anaconda
Well-Known Member
- Posts
- 4,894
- Location
- Thames Valley
It will be the cheapest of Chinese tat which will be barely capable of switching a relay.I ended up putting my switches in a MUD dash pod
MUD Pod
The Mud Pod provides a neat and simple to install solution for competition users, expedition vehicles and emergency vehicles whose requirements demand additional dashboard space in order to accommodate auxiliary controls. External Dimensions (L) 340mm x (D) 109mm x (H) 80mm The Recessed facia...
Just a word of warning about the item in the picture, i got one of those to install in the back in a custom shelfing box i built and i found a few of the crimps were loose on the prewired harness.
Before you start with it, i would recommend recrimping everything or try pulling the wires to just check, last think you want is a live wire rattling around in the dash
I have one of them Mudstuff things, took it off as it restricted the view of the passenger front corner.
Similar threads
