If you have any question mate just ask.Very nice work mate! Just as I think Im getting somewhere you drop an update !
Cheers
Strip down and rebuild into the ultimate Overlander.
- Thread starter landy-lee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Cheers
frog hopper
Well-Known Member
- Posts
- 4,764
- Location
- france
Just a thought here, having seen your latest photo's and your bulkhead, now might be the time to think about a screen washer upgrade, be easy to do it before the screen is put in place.
Yes i have been thinking about this but not sure what to do.
what are your ideas?
Cheers
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
This +1
@landy-lee , you should be super pleased with the hard work results. Look forward to seeing more progress pics....
Cheers mate. i am on the engine to day. head bolts done just on the timing belt!
Taking 5 mins with a brew
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
Looking good Lee. You must be well proud.
kurtjohnson10
Well-Known Member
- Posts
- 15,235
- Location
- midlands
- Posts
- 9,098
- Location
- North Lincs
Really impressive work Lee, you are going to to have a superb overland vehicle!
payydg
Well-Known Member
- Posts
- 3,907
- Location
- Aberdeenshire
Have you put some of this up on instagram? I seem to remember you mentioning that or perhaps I've made that up
based on previous years data noDo you think we will have snow falling on xmas day this year?
Thanks
Kurt
hello mate hope you are well
yes my instergarm page is @110_adventures
message me if you are on there.
kurtjohnson10
Well-Known Member
- Posts
- 15,235
- Location
- midlands
Thank you
I have to say keep up the good work Lee.
I have enjoyed reading your thread on the rebuild. You are doing a great job mate
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
When i finished my rebuild, although not in the same league as yours, it was cleaned and painted to within an inch of its life underneath. Alas, a few years down the road, it looks like any other country 4x4. The axles, trailing arms chassis all have rust coming through again. Unless you galv. everything, be aware that it wont look that good for long.
Mine isn't a show, i will be using it for what its built for. I have used corroless paint and it good stuff so this will help slow the inevitable.When i finished my rebuild, although not in the same league as yours, it was cleaned and painted to within an inch of its life underneath. Alas, a few years down the road, it looks like any other country 4x4. The axles, trailing arms chassis all have rust coming through again. Unless you galv. everything, be aware that it wont look that good for long.
Will give you a update in 4 years time lol
Hi all hope you are well
Bit of a update on the build. I have been chipping away at it doing all them small jobs that know one sees and take for eva to do!
Paint went on thick with a few runs bit i never wanted a show car just somthing that was mechanically sound that i can take down a scratchy green lane and spot repair a year down the line if needed.
It will be on the road with the old doors on and my plan over the winter is to built up new and fit one at a time.
MOT in OCT
Bit of a update on the build. I have been chipping away at it doing all them small jobs that know one sees and take for eva to do!
Paint went on thick with a few runs bit i never wanted a show car just somthing that was mechanically sound that i can take down a scratchy green lane and spot repair a year down the line if needed.
It will be on the road with the old doors on and my plan over the winter is to built up new and fit one at a time.
MOT in OCT
- Posts
- 12,098
- Location
- Far out West
- Posts
- 9,098
- Location
- North Lincs
Well I like it
