Hi all I have a weird fault with the rear air suspension on my discovery. I have read the definitive guide on this forum but it haven’t come to a solid conclusion after reading it.
So I parked the discovery up Saturday afternoon and everything was fine no issues at all.
Started it today and all the pre check lights went out as normal so started and drove, still no warning lights, I drove down our bumpy farm track and thought the ride seems very harsh this morning. Got to the end of the track and decided to have a look and the suspension was on the bump stops. The compressor wasn’t kicking in at all so I tried turning the engine on and off to kick the compressor to life, tried the air suspension button and that just stays flashing constantly with the one beep to say it’s pumping up but still no faults are being logged. I can’t hear the compressor working at all, I removed the relay for suspension and that logs faults on the dash. No fuses blown, checked the compressor and everything looks fine.
I tried jacking the back up on the tow bar to try and get it working but the compressor doesn’t appear to be working.
I’ve looked to see why the suspension went down to start with and it looks like one of the connectors on the valve block has stripped and is loosely on the thread enough to keep it pumped up and looking normal when used on a daily basis but leaving it for a couples of days see the suspension sag.
Will a bad compressor cause the warning lights to stay lit on the dash?
Is there a reset procedure I’ve tried leaving battery disconnected for 15 minutes as well which didn’t help.
So I parked the discovery up Saturday afternoon and everything was fine no issues at all.
Started it today and all the pre check lights went out as normal so started and drove, still no warning lights, I drove down our bumpy farm track and thought the ride seems very harsh this morning. Got to the end of the track and decided to have a look and the suspension was on the bump stops. The compressor wasn’t kicking in at all so I tried turning the engine on and off to kick the compressor to life, tried the air suspension button and that just stays flashing constantly with the one beep to say it’s pumping up but still no faults are being logged. I can’t hear the compressor working at all, I removed the relay for suspension and that logs faults on the dash. No fuses blown, checked the compressor and everything looks fine.
I tried jacking the back up on the tow bar to try and get it working but the compressor doesn’t appear to be working.
I’ve looked to see why the suspension went down to start with and it looks like one of the connectors on the valve block has stripped and is loosely on the thread enough to keep it pumped up and looking normal when used on a daily basis but leaving it for a couples of days see the suspension sag.
Will a bad compressor cause the warning lights to stay lit on the dash?
Is there a reset procedure I’ve tried leaving battery disconnected for 15 minutes as well which didn’t help.