Steering box drop arm seal replacement.

sharkey964 · Oct 15, 2017

OK,guys.
Last weekend I replaced the seals on the drop arm steering box of my mates 300tdi.
An interesting job,to say the least.
Anyhoooow.
I was reversing it into the garage yesterday to change the cam belt.& the steering box seal blew out.I had somehow pushed the C clip & the seal out,so,dropped all the fluid.Hey ho.
Pulled it appart,I thought perhaps I hadn't seated the C clip properly.
So,rebuilt it,making sure the C clip was properly seated....Guess what?The bugger has done it again.
So,my question is,do any of you clever people have any idea why it may have done this????
I'm stumped.
Thanks a lot
Marc

nobber · Oct 15, 2017

britpart?

jamesmartin · Oct 15, 2017

sharkey964 said:
OK,guys.
Last weekend I replaced the seals on the drop arm steering box of my mates 300tdi.
An interesting job,to say the least.
Anyhoooow.
I was reversing it into the garage yesterday to change the cam belt.& the steering box seal blew out.I had somehow pushed the C clip & the seal out,so,dropped all the fluid.Hey ho.
Pulled it appart,I thought perhaps I hadn't seated the C clip properly.
So,rebuilt it,making sure the C clip was properly seated....Guess what?The bugger has done it again.
So,my question is,do any of you clever people have any idea why it may have done this????
I'm stumped.
Thanks a lot
Marc

you did fit the steel backing washer after seal and before circlip, for it to blow out circlip or housing would have to be poor or the fitting

sharkey964 · Oct 16, 2017

Yes,for sure James.

jamesmartin · Oct 16, 2017

sharkey964 said:
Yes,for sure James.

have you tapped seal and steel backing washer far enough up before fitting circlip in to its groove

sharkey964 · Oct 16, 2017

I dont know,I'm re doing it later this eve,will updade later.
Thanks
Marc

sharkey964 · Oct 17, 2017

Ok,it turned out the circlip wasn't seated properly.
When the 2 seals were fitted,the blue one and the black rubber metalcoverd one,there wasn't much room to fit the circlip,I could only just see the groove.
Anyhoooow;I got it in eventualy last night.
So,we'll see how it goes.
Thanks for all imput lads.

Marc

Steering box drop arm seal replacement.

sharkey964

Active Member

nobber

Well-Known Member

jamesmartin

Well-Known Member

sharkey964

Active Member

jamesmartin

Well-Known Member

sharkey964

Active Member

sharkey964

Active Member

Similar threads