starter dog to fit 2.5 N/A?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
samc88

samc88

Drivels spiritual representative
Posts
2,838
Location
Anglesey, North Wales
As above really, does anybody know where to get a starter dog for a 2.5 N/A? Or is it the same thread as the series starter dogs on the 2.25s?

Asking as i have a capstan winch to fit to my 88 and only have a pulley bolt at the minute. If i can't find one I will probably adapt the drive shaft to take a 42 mm socket but obviously i would prefer to have the proper unit
 
samc88 said:
As above really, does anybody know where to get a starter dog for a 2.5 N/A? Or is it the same thread as the series starter dogs on the 2.25s?

Asking as i have a capstan winch to fit to my 88 and only have a pulley bolt at the minute. If i can't find one I will probably adapt the drive shaft to take a 42 mm socket but obviously i would prefer to have the proper unit
Click to expand...
i think you need a special dog std starter dog wont do ,with a std dog you can turn the engine but engine wont drive the handle
 
Ah right so you mean it would have to be a fixed dog?

Do you see any problems with using a socket on the pulley bolt? the shafts spring loaded so theres force applied to the bolt so is unlikely to jump off and round
 
Found the proper starting dog for the winch for a 5brgengine on craddocks for £124. F**k that, I'll make my own or modify my drive shaft to fit the engine;. either way its way too pricey for me
 
You must log in or register to reply here.

Similar threads

T
anyone ever spun over a petrol by hand to measure compression?
Replies
11
Views
1K
boguing
boguing
P
Is it worth swapping out my worn 2.25 D for a 2.5 D
2
Replies
21
Views
1K
Pezer
P
S
Lucas Starter Motor on Freelander 1
Replies
11
Views
868
Andy Warren
Andy Warren
A
Series 3 Looking for a classic ladrover repair garage in South Wales
2
Replies
27
Views
3K
Ausman123
A
C
2.5 Petrol Timing
Replies
4
Views
609
styleruk
styleruk
Back
Top