Staked nut on TD5 axle?

reiny · Dec 11, 2018

I am about to rebuild the swivels on a mate's 2001 TD5 110. Will the nuts holding the hub be staked or the regular double nut and bend over tab?

jamesmartin · Dec 11, 2018

staked

blue beasty · Dec 11, 2018

For stacked I'm guessing castle?

tottot · Dec 11, 2018

A staked nut has a plain flange a part of which that you bend over like you do a tab to prevent movement.

reiny · Dec 11, 2018

Thanks. And I guess the usual box spanner isn't man enough for the job right? Should I get a 52mm socket?

1988smithy · Dec 11, 2018

I'll be doing my swivels and bearings after Xmas, if you fancy doing a write up

reiny · Dec 11, 2018

I have done mine quite recently. Not a difficult job by any means. Very Very messy though.

bluedog333 · Dec 11, 2018

reiny said:
Thanks. And I guess the usual box spanner isn't man enough for the job right? Should I get a 52mm socket?

Yeah, you’ll need the socket and breaker bar.

Kwakerman · Dec 11, 2018

bluedog333 said:
Yeah, you’ll need the socket and breaker bar.

An ideally a torque wrench to do them up

Kwakerman · Dec 11, 2018

reiny said:
I am about to rebuild the swivels on a mate's 2001 TD5 110. Will the nuts holding the hub be staked or the regular double nut and bend over tab?

Should be staked nuts but reverting to double nut arrangement is not unknown so who knows?

Staked nut on TD5 axle?

reiny

Active Member

jamesmartin

Well-Known Member

blue beasty

Leaks an prone to bits dropping off

tottot

Well-Known Member

reiny

Active Member

1988smithy

Well-Known Member

reiny

Active Member

bluedog333

Well-Known Member

Kwakerman

Well-Known Member

Kwakerman

Well-Known Member

Similar threads