Stainless Exhaust latest info please

sandyt · Sep 29, 2013

Hi gents many posts read most but wondered if there is a manufacturer /fabricator who seems to be best ?? What are experiences

donp38 · Sep 29, 2013

MrGorsky · Sep 29, 2013

donp38 said:
SS

With SS, do you have to have the four-square-tail-pipes option that they show on their website?

It's a bit bling for me...

Bix · Sep 30, 2013

I was thinking about using a bespoke place in Barton (Rebel Powerpipes) for a stainless zorst. I used them to get a custom system for my Yota Surf as it was about £400 wangers for a full turbo back system, rather than paying £1,000 to import one from Japan.

rewmer · Sep 30, 2013

I would have say Powerflow. Built exactly what I wanted, with a huge range of tailpipes. Tuned the note until I was perfectly happy over three visits at no extra charge. Sounded awesome - quiet but rumbly when required.

aj1954 · Sep 30, 2013

I used Longlife in Carshalton for a Custom-Made straight-thru in 2.5"on my Isuzu Bighorn 3.1D, Watched it being made,4hrs £400, A Work of Art, Would recommend.

martynv8 · Sep 30, 2013

My Janspeed cat back system is well made & sounds great. The pattern puts the rear offside tailpipe pretty close to the rear airspring though so i followed advice on here & wrapped some heatshield tape around this part.

Datatek · Sep 30, 2013

Very happy with my Double S cat back system.

sandyt · Sep 30, 2013

Interesting that everyone seems to be happy suppose it comes down to cost

Datatek · Sep 30, 2013

sandyt said:
Interesting that everyone seems to be happy suppose it comes down to cost

Double S was the only off the shelf one with twin tail pipes that I could get for the diesel. Got quite an improvement in MPG after fitting it.

sandyt · Sep 30, 2013

Might give them a ring

martynv8 · Sep 30, 2013

RANGE ROVER EXHAUST 4.0 4.6 P38 JANSPEED CAT BACK SS726 | eBay

Bix · Sep 30, 2013

Datatek said:
Double S was the only off the shelf one with twin tail pipes that I could get for the diesel. Got quite an improvement in MPG after fitting it.

Do you have a link or part number for this item? My zorst is showing early signs of failure.

Datatek · Sep 30, 2013

Bix said:
Do you have a link or part number for this item? My zorst is showing early signs of failure.

Bought it from www.Famousfour.co.uk part numbers LR3194; LR4124; LR4125 total £399 +VAT. Fitted perfectly.

Bix · Sep 30, 2013

Datatek said:
Bought it from Famous Four - Independent Land Rover Parts, Accessories, Sales & Servicing Specialist - Land Rover Parts, Land Rover Accessories, Land Rover Vehicle Sales, Servicing & Repair part numbers LR3194; LR4124; LR4125 total £399 +VAT. Fitted perfectly.

Hmm, they mustn't sell it any more as those part numbers come up empty handed. Have a premade kit for same price though.

rasheed · Sep 30, 2013

BORLA. bee's knees, cat's whiskers, you name it.

Datatek · Oct 1, 2013

Bix said:
Hmm, they mustn't sell it any more as those part numbers come up empty handed. Have a premade kit for same price though.

It was pre made, those are the part numbers from their invoice, I just ordered a Double S twin tailpipe system for a diesel.

Stainless Exhaust latest info please

sandyt

Well-Known Member

donp38

Well-Known Member

MrGorsky

Well-Known Member

Bix

Loading...

rewmer

Well-Known Member

aj1954

Well-Known Member

martynv8

Well-Known Member

Datatek

Well-Known Member

sandyt

Well-Known Member

Datatek

Well-Known Member

sandyt

Well-Known Member

martynv8

Well-Known Member

Bix

Loading...

Datatek

Well-Known Member

Bix

Loading...

rasheed

Well-Known Member

Datatek

Well-Known Member

Similar threads