- Posts
- 12,098
- Location
- Far out West
Spare wheel mounting
- Thread starter Ewhi
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
I suspect that your windscreen would have got broken regardless of whether there was a tyre on the bonnet or not
- Posts
- 12,098
- Location
- Far out West
I suspect that your windscreen would have got broken regardless of whether there was a tyre on the bonnet or not
It was the wheel bending the A post that broke it. It was back on the road within 3 days. The hi-lift jack on its brackets in the back broke away and smashed the truck cab rear windows
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
so basically stuff in and on the car will break everything glass in a crash
I carry a fair bit in mine might look into a way to secure it all better
- Posts
- 12,098
- Location
- Far out West
so basically stuff in and on the car will break everything glass in a crash
The bolts holding the hi-lift brackets pulled through the bulkhead. Maybe larger washers would have helped spread the load
Tim4x4
Well-Known Member
- Posts
- 2,200
- Location
- In the shed
Ok a few photos of the rear folding deck.
First flat giving complete load space.
Second the first section folded over giving access to tools when they are there.
Third middle section folded up to create a seat (not to be used when in motion)
Forth fully folded this gives access to the spare also the spare can be strapped vertically to give more load space. Or spare removed and placed behind front seats giving even more load space.
Tim
Attachments
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
That works well.
Tim4x4
Well-Known Member
- Posts
- 2,200
- Location
- In the shed
Yes it has turned out to be very useful.
Tim
Just renewed my rear safari door and repainted it. SO i dont want to put back the three bolt wheel mount and have bought a Britpart swingaway jobbie. Trouble is i dont want to drill the holes for the new bolts so its still in the garage.... My old door couldnt take the weight of the Boost alloy and tyre and split and bent. I am thinking of using the old mount to add to the rear of the seat back divider in the rear of the vehicle instead. I dont object to losing some space and can moe the two rear bench seats to mae the room i need. Then it wont get stolen and wont damage my nice new rear door either.
