I'd want a very serious investigation of the chassis and bulkhead, do the usual VIN checks etc
plus 1, also indeed as mentioned with regards to previous mot history , personally wouldn’t touch it seeing back in 2014 there were reports of excessive rust, also it’s had a colour change from blue to white , but alas don’t think that makes much difference
but as u also say ref the vin and full HPi check
noticed no video taken of the front underside/ engine
2016
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2),
Offside Brake back plate(s) securing device excessively deteriorated (3.5.1j),
Brake pedal pad not secure to the pedal (3.3.A.1c),
Front registration plate fitted to the front does not have black characters on a white background (6.3.2a),
Rear Upper Axle king pin retaining device missing (2.5.A.3a),
Nearside Front Front suspension retaining device missing (2.5.A.4)
2014
Driver's seat insecure (6.2.A.1),
Nearside Passenger's seat insecure (6.2.A.1),
Direction indicators incorrect colour (1.4.A.2f),
Stop lamp not working (1.2.1b),
Brake fluid warning lamp inoperative (3.6.G.2),
Registration plate lamp not working (1.1.C.1d),
Rear fog lamp switch faulty (1.3.1a),
Horn not working (1.6.2a),
Steering system excessively rough (2.2.D.1),
Windscreen wiper does not clear the windscreen effectively (8.2.2),
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2),
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2),
Front Panhard rod has excessive play in a pin/bush (2.4.G.2),
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2),
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2),
Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2),
Parking brake: efficiency below requirements (3.7.C.1b),