tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
It would smell like a chip shop
Thanks Geoff
It'll get used but not as a daily
What's wrong with that.
Soft dash restoration
- Thread starter dunkan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
What's wrong with that.
Expletive
Active Member
- Posts
- 120
- Location
- South Wales
Love seeing a workshop full of RRCs and RRC parts.
freder
New Member
- Posts
- 44
- Location
- Near Angers, France
I got mine disassembled in a garage in Poole, Dorset, and they were amazed that I had no rust underneath, after almost 25 years of continuous use.
The only rust I got was guess where under the rubber mats of the driver's cabin. Ouh!
But otherwise very clean!!
Rust is the Nr 1 killer of a car.
She looks great! Try perhaps another color, as I think that black is not so good for a Classic. Is it the original color?
Can't say i've seen a single classic that didn't have something rotten on it, you must have the only one. Did they take the body panels off yours ?
Chassis on mine was very good and mainly only surface rust but you cant check inside very easily hence
mine is being acid dipped and galvanized in zinc
Its Beluga Black and for me looks perfect on a classic, it wont be changing colour for sure
Last edited:
Ian46
Active Member
- Posts
- 323
- Location
- Basse Normandie, France
The weather conditions are better here in France so the cars don't rot away as fast as they do in the UK.
Maybe if they live all their life on the south coast in the sunshine
If they're up north then i doubt they'd be any better
A few pics sealing the shell with 3M body sealer etc, have a few more
areas to do and then it's off into the paintshop.
areas to do and then it's off into the paintshop.
Attachments
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
Looks Great. Will no dout last another life time now
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
Great picture dunkan, i love that through all this, the headlining is still in !
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
This is making me want to get my RRC hard dash rebuilt
Final prep on the engine bay
Engine and box cleaned & separated, the air tank and control
box back from the powder coaters. Just need a chassis now
Engine and box cleaned & separated, the air tank and control
box back from the powder coaters. Just need a chassis now
Attachments
brianp38dse
Well-Known Member
- Posts
- 20,067
- Location
- heathrow
Thats going to be some nice motor, much better than factory when finished top class job
brianp38dse
Well-Known Member
- Posts
- 20,067
- Location
- heathrow
Thats the really rewarding bit,with every bit you put on it all takes shape
v8geoff
Well-Known Member
- Posts
- 3,327
- Location
- chippenham,wiltshire
Wow looks amazing bet you well chuffed
