Soft dash restoration
- Thread starter dunkan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
got the decals ordered ?
Nope
It's going to get a full re paint at some stage in the hopefully near future so no point fitting them.
I've not even looked into where to get them from yet, do LR still sell them ?
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Looks nice.
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
Nope
It's going to get a full re paint at some stage in the hopefully near future so no point fitting them.
I've not even looked into where to get them from yet, do LR still sell them ?
i got mine from Famous Four
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
That does look really nice.
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
didnt you get it painted in the rebuild ?
The shell was painted along with the bottom tailgate, scuttle
panel & bonnet.
The rest needs doing and i'm in the process of finding somewhere
to do it, i'm in no rush
Stripped and cleaned the rear door cards yesterday and then treated
all the door cards with the Poorboys Natural interior dressing.
all the door cards with the Poorboys Natural interior dressing.
Attachments
I'm removing the window frames from the rear doors now, the support pieces that fit
under the small windows are badly corroded
The offside is way worse than the nearside but i'll be changing both, i sprayed
the frame mounting bolts with 3 in 1 penetrating spray and all of them have come
out.
The top one near the door lock on both sides took some patience to get it out and
didn't feel very nice, had to slowly go back and forth bit by bit or i think they would of
snapped off in the frame
I'll wait till i've got the frames out but they might be getting replaced as well if the
rot has spread too far.
under the small windows are badly corroded
The offside is way worse than the nearside but i'll be changing both, i sprayed
the frame mounting bolts with 3 in 1 penetrating spray and all of them have come
out.
The top one near the door lock on both sides took some patience to get it out and
didn't feel very nice, had to slowly go back and forth bit by bit or i think they would of
snapped off in the frame
I'll wait till i've got the frames out but they might be getting replaced as well if the
rot has spread too far.
Last edited:
Got the frames out and will be replacing both.
Had a great result and found 2 brand new frames less than 1 hrs
drive away so collected those this afternoon
Some parts arrived from Land Rover as well so all in all it's been a
good day
If anyone is after the frames i got mine from APB Trading near Bromsgrove, i think
they have 3 left
Had a great result and found 2 brand new frames less than 1 hrs
drive away so collected those this afternoon
Some parts arrived from Land Rover as well so all in all it's been a
good day
If anyone is after the frames i got mine from APB Trading near Bromsgrove, i think
they have 3 left
Attachments
Last edited:
Had a bit of a hold up sorting the rear door window frames out as i
decided to freshen up the new old stock replacements i'd bought.
Yesterday i got them flatted down and gave them a fresh coat of
satin Black.
Fingers crossed i'll be assembling them and putting them in the doors
hopefully on Saturday.
decided to freshen up the new old stock replacements i'd bought.
Yesterday i got them flatted down and gave them a fresh coat of
satin Black.
Fingers crossed i'll be assembling them and putting them in the doors
hopefully on Saturday.
Attachments
Last edited:
The frames are back in the doors now, new bonnet catch is fitted, drivers door lock now works off the key and the fob and fixed a fuel leak on the breather pipe on the filler neck.
Started putting the door cards back together now as well
Started putting the door cards back together now as well
Attachments
Afternoon All
I started following this thread last night and have just signed up.
I have a '94 Vogue SE Softdash 3.9 V8 with 1 owner and 70k miles in Plymouth blue i am restoring/tidying up (Not to the extent of this beauty though!)
2 questions to Dunkan:
1. Do you have the part number of the gear selector surround as mine is no good and while i've got the vehicle stripped i'd like to replace it (the black sliding cover is ripped/holed around the selector shaft)
2. Have you found a way of restoring the wooden inlays as some of mine have discoloured? I am debating on painting them and going for the Piano Black look (Not direct gloss) but don't really want to detract its value as ultimately once it's done it's going up for sale.
Excellent work with your own vehicle by the way, a true beauty!
Many Thanks
Dave
I started following this thread last night and have just signed up.
I have a '94 Vogue SE Softdash 3.9 V8 with 1 owner and 70k miles in Plymouth blue i am restoring/tidying up (Not to the extent of this beauty though!)
2 questions to Dunkan:
1. Do you have the part number of the gear selector surround as mine is no good and while i've got the vehicle stripped i'd like to replace it (the black sliding cover is ripped/holed around the selector shaft)
2. Have you found a way of restoring the wooden inlays as some of mine have discoloured? I am debating on painting them and going for the Piano Black look (Not direct gloss) but don't really want to detract its value as ultimately once it's done it's going up for sale.
Excellent work with your own vehicle by the way, a true beauty!
Many Thanks
Dave
Hi Dave and welcome to the forum
When you fit the gear selector surround replace the bulbs with LED's
I'm piano Blacking my wood trim, depending on how bad yours are i would think
at the least they could be flatted back an re lacquered.
I also found this company at the NEC classic car show, they quoted
me as a guide price £300 to piano black my wood trim.The samples they had
on display looked very good
www.classical-dash.co.uk
When you fit the gear selector surround replace the bulbs with LED's
I'm piano Blacking my wood trim, depending on how bad yours are i would think
at the least they could be flatted back an re lacquered.
I also found this company at the NEC classic car show, they quoted
me as a guide price £300 to piano black my wood trim.The samples they had
on display looked very good
www.classical-dash.co.uk
Attachments
Last edited:
A few photos from Sunday, cleaned the dash properly with G101
and treated with Poorboys vinyl dressing.
Fitted the door cards and went round the paintwork flatting and
mopping to get it looking a bit better.
and treated with Poorboys vinyl dressing.
Fitted the door cards and went round the paintwork flatting and
mopping to get it looking a bit better.
Attachments
Rustystuff
Active Member
- Posts
- 237
That is looking good ! Cracking job.
dippytris
New Member
- Posts
- 3
- Location
- Alcester,Warwickshire
Awesome job and she looks stunning well done Dunkan you've given me some ideas now cheers mate
