SLS raise/lower remote - faking it?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Those links seem to suggest that that part is either out of stock or discontinued.

To be fair, I haven't a clue of the RRP of the plip. I will give the dealer a call tomorrow and find out for comparison. Don't forget the OEM plip would need programming, so if you didn't have nano com etc you'd need to factor that in ;-). I think I can deliver my kit for 29.99 or so for what it's worth ;-)
 
I have managed to find a place who has a few in but he says they are for export they are new and he will sell me one

For "export" usually means the plip uses 315MHz (US market) instead of 433 which is common for UK and rest of EU.

Bare in mind your car has 433MHz receiver so will not work with 315MHz plip.
 
I've got a couple finished, but it has to pass one final test.

My fiancee has to successfully fit it, following the kit instructions.
If it passes that test, it's good to go ;-)
 
Hi guys,

I now have a couple of these boards ready to go.

They are fully working, but as the kits are quite new, I'd not be surprised if there were the odd teething problems (likely 'wire not long enough', 'instructions not clear').

If anyone who considers themselves fairly competent at such things and wants to have a go, please drop me a PM. I'll be happy to work through issues until things are a little more well tested in the field :)

They're £29.99 shipped, as previously mentioned!

Cheers,

David
 
Just to let anyone who likes the idea of this kit I have now fitted one. It works a treat at the press of a switch.
A well made kit, all the necessary parts supplied with easy to follow instructions and at a sensible price.
Well done David

Steve M
 
Back
Top