Disco 2 Sls height values after sensor change

andy85 · Apr 25, 2018

changed my sensors today as they were becoming detached.
Disconnected the battery and replaced with new ones.
Plugged in nanocom and read the height values
I have 155 at left and 142 on right with engine off.
The measurements on left are 468 from centre hub to arch
And 476 on right.
Does this sound about right? Or do I need to recalibrate it?

brian47 · Apr 25, 2018

The nominal figure for the height setting from the centre of the wheel to the wheel arch is 473 mm +/- 15 mm.
So I'd reckon that you're well within spec.

Landmark2 · Apr 25, 2018

+1 Also the figures you're getting with the Nano mean nothing in actual measurement terms.
Griff

andy85 · Apr 25, 2018

Yeah I thought it was a bit odd,just didn’t want it to carry on inflating the bags til they went pop,driving to airport in this Friday morning so needs to be ok lol

Rangie Disco Sportsman · Apr 29, 2018

On the Disco you can just unbolt the bump stops and use two blocks of wood cut to the right height to calibrate without having to fork out for the LR specific ones so might as well measuring from the hub to the arches etc I never feel you can get it quite right.

Disco 2 Sls height values after sensor change

andy85

Active Member

brian47

Well-Known Member

Landmark2

Well-Known Member

andy85

Active Member

Rangie Disco Sportsman

Active Member

Similar threads