Shuttle valve

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jonnymoore

jonnymoore

Member
Posts
43
Location
wokingham
Hi again

I had intermittent 3 amego's lights on my TD5....fault code read shuttle valve.....I replaced this and all seemed well...but recently the same issue, but with no fault code this time.

Sometimes they're on from start up, and other times they come on whilst driving.

When I replaced the valve the electrical plug was clean and the abs block was dry.

Any ideas?
Thanks
 
As Tony has already asked, did you just replace the shuttle valves switch plate, or did you do the modification?
In addition to that, the SLABS ECU can sometimes store historic fault codes which might bring up fault indications. If that's the case you'll need to get then cleared.
There's plenty of information here on this forum or on the internet, just search for "SVS mod" or "3 amigos". You should find more than you want to know.
Just to help you along, I've attatched some stuff which might help.

Shuttle valve wiring.jpg

Thanks to sierrafery for the wiring diagram.
 

Attachments

  • OPTION B.pdf
    1.1 MB · Views: 218
You must log in or register to reply here.

Similar threads

Henry.adams
Traction control problems
Replies
9
Views
622
Henry.adams
Henry.adams
02Disco2
Disco 2 Abs & TC lights but no fault codes
Replies
1
Views
217
sierrafery
sierrafery
R
Necessary step for some shuttle valve switch bypass methods
Replies
4
Views
2K
Rover Easy
R
A
Help D3 Suspension
Replies
3
Views
499
Andrew bibby
A
U
Discovery 2 ACE light on
Replies
4
Views
584
Unimatrix 01
U
Back
Top