P38A Should this bracket be attached?

Andy Burrell · Dec 22, 2021

Have started to sort a few things out in the engine bay, including lubricating the throttle cable, replacing the battery(as it was leaking) fitting a cover on the ecu box that was missing.
I have found a bracket that doesn't appear to be attached to anything and I just wondered where it should be attached? Picture attached.
Next need to sort the rear washer as it seems dead as a dodo. [GALLERY=]

[/GALLERY]

kermit_rr · Dec 22, 2021

If you mean the bracket on the coolant pipe, it should be attached to the one next to it that's threaded.

What's with the U shaped pipe? Did it used to have LPG?

marjon · Dec 22, 2021

I would take a guess and say yes, to the bit directly below which looks to have a captive nut

J

tomcat59alan · Dec 22, 2021

kermit_rr said:
If you mean the bracket on the coolant pipe, it should be attached to the one next to it that's threaded.

What's with the U shaped pipe? Did it used to have LPG?

Or is it a throttle body heater bypass? But at the other end from the TB.

Andy Burrell · Dec 22, 2021

It still has LPG but I have not used it and will be getting it serviced and tested before I do at a local specialist. I did suspect the bolt and thread hole but they don't come together easily, maybe why it's missing.
Don't think it's had a lot of love recently but I will make it work a bit better.
The Hevac screen works sometimes and not others so another thing to add to the list

tomcat59alan · Dec 22, 2021

Andy Burrell said:
It still has LPG but I have not used it and will be getting it serviced and tested before I do at a local specialist. I did suspect the bolt and thread hole but they don't come together easily, maybe why it's missing.
Don't think it's had a lot of love recently but I will make it work a bit better.
The Hevac screen works sometimes and not others so another thing to add to the list

Damp cold can cause the screen to stop working,try getting the car hot inside and run the A/C ,if that doesn't work have a look on the Bay for a Hevac zebra repair ribbon kit.

kermit_rr · Dec 22, 2021

tomcat59alan said:
Or is it a throttle body heater bypass? But at the other end from the TB.

It's good, but it's not right

tomcat59alan · Dec 22, 2021

kermit_rr said:
It's good, but it's not right

But better than a leaking throttle body.

P38A Should this bracket be attached?

Andy Burrell

Retired to the country

kermit_rr

Very

marjon

Well-Known Member

tomcat59alan

Well-Known Member

Andy Burrell

Retired to the country

tomcat59alan

Well-Known Member

kermit_rr

Very

tomcat59alan

Well-Known Member

Similar threads