crowsanwra
Member
- Posts
- 61
- Location
- crows an wra cornwall
having recently acquired a series 3 tdi Landover I notice that I am getting a lot of vibration from the engine at all revs and putting it into overdrive doesn't help any ideas anyone
serries 3 tdi
- Thread starter crowsanwra
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
darius
Active Member
- Posts
- 254
- Location
- Kidderminster
What are you comparing the vibration against? These are not quiet or smooth motors tbh
tottot
Well-Known Member
- Posts
- 7,902
- Location
- west wales coast
Not running on all cylinders?
Worth a look at Glencoynes web site he fits modified defender engine mounts which absorb the vibrations better.Sells good quality OEM items
Engine conversion parts
Need to cut them like this.
Engine conversion parts
Need to cut them like this.
Attachments
ebbadger
Well-Known Member
- Posts
- 1,518
- Location
- Twickenham, Middlesex
+1 to genuine engine mounts, makes a big difference over cheap copies
cheers steve
cheers steve
nickjaxe
Well-Known Member
- Posts
- 821
- Location
- North Cheshire/Merseyside
Depends what vibrations your getting...it it just like making the gear stick rattle?????
crowsanwra
Member
- Posts
- 61
- Location
- crows an wra cornwall
thanks turned out to be a very worn engine mout and also the engine was tight agaist the bulkhead so all in bits
ciderman
Active Member
- Posts
- 768
- Location
- sunny worcestershire
Check your gearbox mounts as well.............
