ciderman
Active Member
- Posts
- 770
- Location
- sunny worcestershire
hi, can some of you fine chaps post a picture of a series one dashboard- so I know what to make...
And where to put it.
thanks
And where to put it.
thanks
Series One- 1955 dashboard
- Thread starter ciderman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mystery
Well-Known Member
- Posts
- 1,514
- Location
- BULKINGTON
depends on what year the series 1 is
mystery
Well-Known Member
- Posts
- 1,514
- Location
- BULKINGTON
my 1957 series 1 dash the rivet counters say its a series 2a because it has extra green light above ign switch but having worked on many british leyland vehicles,
they have a tendency to modify on the build as mine's fitted with DELLA rear lights much rarer than the pork pie type
they have a tendency to modify on the build as mine's fitted with DELLA rear lights much rarer than the pork pie type
Attachments
mystery
Well-Known Member
- Posts
- 1,514
- Location
- BULKINGTON
ciderman
Active Member
- Posts
- 770
- Location
- sunny worcestershire
I have no light switch....
ciderman
Active Member
- Posts
- 770
- Location
- sunny worcestershire
just an oil pressure gauge that isn't connected.....
mystery
Well-Known Member
- Posts
- 1,514
- Location
- BULKINGTON
images would help
ciderman
Active Member
- Posts
- 770
- Location
- sunny worcestershire
Aha! Images!
[GALLERY=][/GALLERY]
er, that didn't work
[GALLERY=][/GALLERY]
er, that didn't work
ciderman
Active Member
- Posts
- 770
- Location
- sunny worcestershire
mystery
Well-Known Member
- Posts
- 1,514
- Location
- BULKINGTON
looks like extensively modified oil gauge where ignition/light switch used to be cigar lighter been fitted and then blanked off where 12volt aux plugs situated ,ignition switch fitted in place of warning lamp .
fan switch fitted in place of panel pull light switch,non original warning light fitted and pos series 3 fuel/water temp gauge unit hope you are not going to become a rivet counter
fan switch fitted in place of panel pull light switch,non original warning light fitted and pos series 3 fuel/water temp gauge unit hope you are not going to become a rivet counter
ciderman
Active Member
- Posts
- 770
- Location
- sunny worcestershire
Where can I learn to count rivets?
