Series Exhaust Manifold

stuthegeordie · Sep 25, 2015

Hey guys,
Does the series exhaust manifold fit the 2.5 petrol defender? I'm having a real job finding a defender one.

Cheers in advance

Marmaduke · Sep 25, 2015

looks like it....

http://www.johncraddockltd.co.uk/la...-early-models-with-conical-end-down-pipe.html

stuthegeordie · Sep 26, 2015

Cheers Marmaduke, I do struggle to find the correct parts for these things!

Marmaduke · Sep 26, 2015

stuthegeordie said:
Cheers Marmaduke, I do struggle to find the correct parts for these things!

If it's a Defender than take a look at this, I've downloaded it and saved it as a pdf so I can look at it whenever and just google the part number for the best price..

https://www.landyzone.co.uk/land-rover/part-numbers-and-paint-colours.138302/

dominicbeesley · Sep 26, 2015

It fits but the exhaust flange and carb flange are different. I'm not sure if a series inlet will mate with a defender exhaust either. I swapped the other way (2,5 onto a series to fit a new carb) and the main difference is the exhaust flange. To confuse matters there are two different exhaust manifolds for defenders. One that has a round knob-end on the exhaust the other is more like a top-hat fitting. If yours is a round one you should be able to bodge em together but you will need to modify your exhaust and exhaust clamp.

stuthegeordie · Sep 26, 2015

There's one on ebay stating it fits my vehicle part number 598473 On Paddocks it just states its for series2 & 3 4 cylinder. ( half the price too)

dominicbeesley · Sep 26, 2015

It might be worth downloading the parts catalogues for both S3 and 90 and see what bits you have to start with.

What carb do you have, and what's up with the old manifold?

D

stuthegeordie · Sep 26, 2015

Its a webber carb, I have a pop from the exhaust when running so checked for leaks and found a crack around one of the manifold to exhaust studs. I should get some pictures.

dominicbeesley · Sep 28, 2015

Which Weber the 34ICH is (usually) on a series manifold the DTML32/34 on a defender manifold.

stuthegeordie · Sep 29, 2015

Pretty sure its a 32/34
I just took the manifolds off.
I'll attempt to post some pictures

[/URL][/IMG]

Series Exhaust Manifold

stuthegeordie

Member

Marmaduke

Well-Known Member

stuthegeordie

Member

Marmaduke

Well-Known Member

dominicbeesley

Well-Known Member

stuthegeordie

Member

dominicbeesley

Well-Known Member

stuthegeordie

Member

dominicbeesley

Well-Known Member

stuthegeordie

Member

Similar threads