Series 3 County restoration

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
New coat of paint on the fuel tank plus bolted up the tub
Cheers
 

Attachments

  • IMG_1115.JPG
    IMG_1115.JPG
    174.2 KB · Views: 154
Petrol tank and sill fitted
cheers
 

Attachments

  • IMG_1119.JPG
    IMG_1119.JPG
    256.7 KB · Views: 151
  • IMG_1121.JPG
    IMG_1121.JPG
    268.7 KB · Views: 155
Fitted the seatbox and did some on the wiring, turned the engine over but now need to charge the battery.
Cheers
 

Attachments

  • IMG_1125.JPG
    IMG_1125.JPG
    443.2 KB · Views: 193
  • IMG_1128.JPG
    IMG_1128.JPG
    293.5 KB · Views: 212
fitted all seat box bolts and seatbelt bracket all seems to line up so far!!!
Cheers
 

Attachments

  • IMG_1130.JPG
    IMG_1130.JPG
    342.9 KB · Views: 147
I was surprised your tank filler spout lined up with the corresponding hole in the back of the seat box. Certainly lots of Britpart new tanks don't. Mine certainly didn't.
About 18 months ago Land Rover monthly ran an article on replacing the tank and suggested that to get it to fit, the outrigger may need 'adjusting' they didn't elaborate on quite what they meant by 'adjusting the outrigger', but unsurprisingly the article was sponsored by the said manufacturer!
 
I was surprised your tank filler spout lined up with the corresponding hole in the back of the seat box. Certainly lots of Britpart new tanks don't. Mine certainly didn't.
About 18 months ago Land Rover monthly ran an article on replacing the tank and suggested that to get it to fit, the outrigger may need 'adjusting' they didn't elaborate on quite what they meant by 'adjusting the outrigger', but unsurprisingly the article was sponsored by the said manufacturer!

Had it easy as the tank was new when I got the Land Rover so had been fitted before. The guy who sold it said he had problems with it.
 
Bit of advice can anyone let me know if the spring fits as shown on the photo just cannot remember (old age you know) Cheers
 

Attachments

  • IMG_1132.JPG
    IMG_1132.JPG
    216.6 KB · Views: 180
  • IMG_1131.JPG
    IMG_1131.JPG
    201.4 KB · Views: 188
Ok now got the primer on the front of the bulkhead and air vent covers. Also pulled it out to see the new colour on the tub, looking good we think!!
Cheers
 

Attachments

  • IMG_1134.JPG
    IMG_1134.JPG
    368.4 KB · Views: 191
  • IMG_1135.JPG
    IMG_1135.JPG
    299.8 KB · Views: 219
  • IMG_1137.JPG
    IMG_1137.JPG
    261.1 KB · Views: 206
  • IMG_1139.JPG
    IMG_1139.JPG
    339.2 KB · Views: 180
Update
Got the second coat on the tub (finnish coat) and the bulkhead and the back door e.t.c. Then a few spots or rain landed so I have a bit to re do. Pleased with the high shine I got from the last coat though.
Hi series 3 sweet 16
the colour ir RAL 7022 umbra grey and not shure I know what you mean about wheels?
Cheers
 

Attachments

  • IMG_1156.JPG
    IMG_1156.JPG
    245.9 KB · Views: 213
  • IMG_1155.JPG
    IMG_1155.JPG
    245.9 KB · Views: 183
  • IMG_1151.JPG
    IMG_1151.JPG
    204.1 KB · Views: 167
  • IMG_1150.JPG
    IMG_1150.JPG
    245.9 KB · Views: 185
  • IMG_1149.JPG
    IMG_1149.JPG
    242.6 KB · Views: 180
We have a windscreen and the front panel plus underside on bonet in primer.
Cheers
 

Attachments

  • IMG_1157.JPG
    IMG_1157.JPG
    287.3 KB · Views: 161
  • IMG_1158.JPG
    IMG_1158.JPG
    254 KB · Views: 198
  • IMG_1160.JPG
    IMG_1160.JPG
    301.4 KB · Views: 187
  • IMG_1162.JPG
    IMG_1162.JPG
    241.2 KB · Views: 192
Hi Land Raver yes it’s a 1982 model even has factory fitted carpets (yet to go back in)
Ok had a go at getting it running and after new points condenser and cleaning plugs found a break in the coil to dizzy wire, solved that and first touch of the key fired up!!!
Then went on to solve oil leak from oil filter housing and water leak from bottom hose, once running ok cleaned some of the engine with thinners and a rag. Also washed out breather with petrol.
My question is best way to fix the new vent seals either double sided tape or contact adhesive?
cheers
 

Attachments

  • IMG_1162.JPG
    IMG_1162.JPG
    241.2 KB · Views: 142
  • IMG_1163.JPG
    IMG_1163.JPG
    261.8 KB · Views: 171
  • IMG_1164.JPG
    IMG_1164.JPG
    236.8 KB · Views: 165
iirc people have used both with good results, heavy duty double sided tape used for holding body trim in place works well apparently, or glue/silicone held in place by masking tape till it sets
 
Back
Top