On going build thread for my Sankey camping/expedition trailer.
Picked up the Sankey on the weekend.
Its pretty good condition. Has had 60% of the tub re done with new sheet metal.
And the chassis looks in very good condition under a few layers of underseal.
I have decided to strip it all down and start from the ground up so I am sure that it is going to last.
Tried out my spare 33" tyre on there to see what it looks like!
Looks Bad Ass! but to big i think and too much additional weight
went out to picked some bits n bobs up and my exhaust fell off! Everything happens right when you don't need it!
Started trying to work out if I would get away with my spare wheel mounted on the rear. Because of the angles when off road.
Im not convinced about it yet.
With landy 1.5ft off of the ground at the front.
I can raise the sankey by around 1.5ft before the A frame touches the spare wheel.
Any thoughts is that enough or should I try something else.
Picked up the Sankey on the weekend.
Its pretty good condition. Has had 60% of the tub re done with new sheet metal.
And the chassis looks in very good condition under a few layers of underseal.
I have decided to strip it all down and start from the ground up so I am sure that it is going to last.
Tried out my spare 33" tyre on there to see what it looks like!
Looks Bad Ass! but to big i think and too much additional weight
went out to picked some bits n bobs up and my exhaust fell off! Everything happens right when you don't need it!
Started trying to work out if I would get away with my spare wheel mounted on the rear. Because of the angles when off road.
Im not convinced about it yet.
With landy 1.5ft off of the ground at the front.
I can raise the sankey by around 1.5ft before the A frame touches the spare wheel.
Any thoughts is that enough or should I try something else.