P38A sacrilege - coil conversion

300bhp/ton said:

Insurance no problem. I own vastly more modified vehicles than a simple coil conversion.

I can see no way the EAS will be cheaper to fix. As I still can’t fully diagnose the problem(s). But I’m thinking maybe 4 new air springs and 2 new height sensors. And that won’t be everything.

Click to expand...

Not if you don't tell them it isn't. It's what happens when you have a claim that is the problem.

wammers said:

Not if you don't tell them it isn't. It's what happens when you have a claim that is the problem.

Click to expand...

Read the rest of my reply. I already run modified vehicles. So it won’t be an issue. The RR is already listed as modified.

Let me preface that it is well known that I am a heathen and a Yank.

That being stated I suggest spending your money on a Bilstein coil conversion. The '93 has been its heavy duty 2 inch lift conversion for 10 years. It's great for off-road. The '95 is on a standard conversion and it cruises right along on the 75-85 mph highway that I drive every day.

300bhp/ton said:

Do you need to fool the computer. Or can you just pull the relay under the passenger seat

Click to expand...

The connector just sits inline with the original one that goes into 2nd across from drivers door on the bottom

Two wires come out of it (+\-) that go round the seat

-
I know which pins they are so all you really need are two wires with a 5amp fuse in the positive, then splice into the two wires originally going to those pins
You could make a neat job solder it up nice
it will literally work with two pieces of wire, 5amp fuse, a knife and some tape


If you haven’t got knife/tape just wrap it in and wear your Kermit wellies
It tucks away neat I just pulled it out to show


You still have to pull relay 20