P38A Ride height signal incorrect and other error

Salisbury Nick · Oct 1, 2022

Hi all

My p38 is currently on its bumps. Plugged in the diagnostics and get two errors;

and;

my ride heights are as follows;

Any suggestions for what I should be setting for ride heights and how to fix the FL signal error?

Nick

Datatek · Oct 1, 2022

If the fault is there again after you clear it, then check the connector to the FL sensor for corrosion.
If the fault clears and does not immediately come back, it could be many things but check the connectors in the EAS box and the earth points first.

Salisbury Nick · Oct 1, 2022

Datatek said:
If the fault is there again after you clear it, then check the connector to the FL sensor for corrosion.
If the fault clears and does not immediately come back, it could be many things but check the connectors in the EAS box and the earth points first.

Thanks, i’ll try that. What do you think about the ride height settings?

Datatek · Oct 1, 2022

Salisbury Nick said:
Hi all

My p38 is currently on its bumps. Plugged in the diagnostics and get two errors;View attachment 275154

and;

my ride heights are as follows;

View attachment 275155

Any suggestions for what I should be setting for ride heights and how to fix the FL signal error?

Nick

You ride height figures are not a lot different to one of mine, wade & normal height fronts are a bit higher.
The heights should be set using the measurement from wheel centre to wheel arch.

P38A Ride height signal incorrect and other error

Salisbury Nick

Well-Known Member

Datatek

Well-Known Member

Salisbury Nick

Well-Known Member

Datatek

Well-Known Member

Similar threads