Disco 2 Ride height sensor prices

MJI

Well-Known Member

Posts

16,780

Location

Worcester

• May 26, 2018

• #1

All over the place seen £35 for 2 to £35 for one

Any issues with the cheapies?

 

GJ1

Active Member

Posts

302

Location

London

• May 26, 2018

• #2

I replaced mine recently with LR stock... so nowhere near your prices... sorry!

 

Iancorky

Well-Known Member

Posts

1,365

• May 26, 2018

• #3

The Britpart ones at £20 last as long as the genuine

 

MJI

Well-Known Member

Posts

16,780

Location

Worcester

• May 26, 2018

• #4

M&M want just over £30 each. Ebay sellers £36 for 2

 

Iancorky

Well-Known Member

Posts

1,365

• May 27, 2018

• #5

You can buy in bulk cheaper

https://www.alibaba.com/trade/searc...duct_en&CatId=&SearchText=RQH100030&viewtype=

Don't know if its a gamble

 

sierrafery

Well-Known Member

Posts

18,260

Location

Arad/Romania

• May 27, 2018

• #6

A friend of mine fitted cheap ones and one of them lasted half day and snapped

 

Nige4927

Active Member

Posts

132

Location

Manchester

• May 28, 2018

• #7

When you replace the ride height sensors do you need I diagnostic tool to calibrate them or are the plug and play so to speak?

Nige

 

Iancorky

Well-Known Member

Posts

1,365

• May 28, 2018

• #8

Nige4927 said:

When you replace the ride height sensors do you need I diagnostic tool to calibrate them or are the plug and play so to speak?

Nige

Click to expand...

No, as long as you disconnect the battery first or remove the SLS relay and fuse
If you don't you run the risk of knocking the calibration out

 

MJI

Well-Known Member

Posts

16,780

Location

Worcester

• May 28, 2018

• #9

Mine is slightly up one side so may get it calibrated (as need the blocks as a bump stop is missing)

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• May 28, 2018

• #10

ive fitted numerous cheap sensors as well as genuine, all were ok apart from one which lasted less than a year

 

meego

Well-Known Member

Posts

11,837

Location

Caledonia

• May 28, 2018

• #11

I have fitted a few on mine. All Genuine and they don’t last long as they always corrode and split the plastic. I might take a punt on aftermarket next time.

 

GJ1

Active Member

Posts

302

Location

London

• May 28, 2018

• #12

The ones I removed were, I believe, the originals, 14 yrs and 100k. No record of them being changed. The sensor itself was fine but the plastic bush/connector was wearing and degrading. The biggest challenge was getting them off as the fixings were pretty gummed-up.....

 

Nige4927

Active Member

Posts

132

Location

Manchester

• May 28, 2018

• #13

Bit by bit I'm replacing all worn parts rather than wait till they go.. I'm lucky I guess as she is in great condition and the chassis is solid its been looked after in that respect and oils and fluids seem to have been checked and changed.. but its the other basics that have been neglected like the injector loom.. which I have now changed.. fuel filter hadn't been changed in forever and the drag rod and tie rod ends were worn... next on my list is the coolant pipes which I will change for silicone and new shocks.. then it will be tackling the injector seals...

Nige