Reversing lights issue
- Thread starter kee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 44,850
- Location
- East Dorset
Only simple stuff. Have you put a meter across the connector to the switch to check for continuity when it is on?, i.e . is it being properly actuated in the box?
Then have you checked there is power to the bulb? Ditto the switch?
Is the bulb holder clean and the spring springy enough to ensure a good connection?
With each wire have you checked for continuity at both ends? Ditto short to earth?
Having looked at the wiring diagram, there is a connection to the BCU so it has a role in all this, how much of a role I do not know, at which point apart form saying good luck, I'll leave it to others. At least it isn't an MOT failure! (Page 43.1 on Rave manual for circuit diagram)
Then have you checked there is power to the bulb? Ditto the switch?
Is the bulb holder clean and the spring springy enough to ensure a good connection?
With each wire have you checked for continuity at both ends? Ditto short to earth?
Having looked at the wiring diagram, there is a connection to the BCU so it has a role in all this, how much of a role I do not know, at which point apart form saying good luck, I'll leave it to others. At least it isn't an MOT failure! (Page 43.1 on Rave manual for circuit diagram)
- Posts
- 44,850
- Location
- East Dorset
Only simple advice. Have you put a meter across the connector to the switch to check for continuity when it is on?, i.e . is it being properly actuated in the box?
Then have you checked there is power to the bulb? Ditto the switch?
Is the bulb holder clean and the spring springy enough to ensure a good connection?
With each wire have you checked for continuity at both ends? Ditto short to earth?
Having looked at the wiring diagram there is a connection to the BCU, so that is beyond my capabilities, at which point apart form saying good luck, I'll leave it to others. At least it isn't an MOT failure! Sorry if I have been teaching you to suck eggs but one never knows the extent of other members skills.
Then have you checked there is power to the bulb? Ditto the switch?
Is the bulb holder clean and the spring springy enough to ensure a good connection?
With each wire have you checked for continuity at both ends? Ditto short to earth?
Having looked at the wiring diagram there is a connection to the BCU, so that is beyond my capabilities, at which point apart form saying good luck, I'll leave it to others. At least it isn't an MOT failure! Sorry if I have been teaching you to suck eggs but one never knows the extent of other members skills.
- Posts
- 44,850
- Location
- East Dorset
Incidentally, if you have not already downloaded the Rave manuals, which will contain the wiring diagram you need, have a look here
http://www.d-lander.com/manuals/
http://www.d-lander.com/manuals/
- Posts
- 44,850
- Location
- East Dorset
(Oops, looked like I posted (slightly differently) twice!)
Landmark2
Well-Known Member
- Posts
- 797
- Location
- Shropshire
Hi Kee,
I assume it's a manual? I had a problem with my switch and replaced it with an oem one but that didn't sort it so used genuine LR and all good. If you try everything suggested and still have no joy, it's probably due to wear on the part that pushes the switch in on the bottom of the gear lever.
Griff
I assume it's a manual? I had a problem with my switch and replaced it with an oem one but that didn't sort it so used genuine LR and all good. If you try everything suggested and still have no joy, it's probably due to wear on the part that pushes the switch in on the bottom of the gear lever.
Griff
Landmark2
Well-Known Member
- Posts
- 797
- Location
- Shropshire
Part 7 here http://new.lrcat.com/#!/1232/38569/38570/2977
- Posts
- 44,850
- Location
- East Dorset
As far as I know, it still isn't illegal to wire in a manual reversing light switch as long as it has a warning light, either in the switch or somewhere on the dash. As far as I can tell, reversing lights only warn people behind you that you are moving backwards. They don't actually illuminate much, unlike the reversing lights fitted by many Mini enthusiasts in the old days which were as bright as a driving light and actually showed you where you were going when you had to turn round down a country lane.
mystery
Well-Known Member
- Posts
- 1,510
- Location
- BULKINGTON
- Posts
- 44,850
- Location
- East Dorset
