Replacing lift up handles...

Alpinewoodsman · Feb 4, 2020

Gmacz said:
Here is my interior handle, doesn't look the same as yours. Mine is 85 90.View attachment 199816

I just used a picture I found on the interwebz that looked right, as mine is outside in the dark and snow and the camera is hiding....It does look like yours.

NiallRussell said:
ahhhh - you've got lift handle outside and pull tab inside. I have that.

Good luck finding new parts to replace bit, thats all i'm going to say

Hence the idea of replace whole door, or bodge in a lift handle on both sides one... it can't make the soundproofing, watertightness or thermal insulation any worse....

Gmacz · Feb 4, 2020

land rover 90-110 early 1983 to 1987 drivers side inner plate type door handle new genuine item MUC6982 . Here is one on ebay £30. Doesn't quite look the same.

nobber · Feb 5, 2020

Is this the lock you need?

nobber · Feb 5, 2020

Nope, thats rear door 110, it would seem this is what you want, but you really do need to check first.

https://www.ebay.co.uk/itm/114079330365

Or , buy some knackered doors off eBay and get the locks out of them. Or, rebuild the ones you have.

I wouldn't fit series doors unless you are going soft top, with a hard top they are several steps backwards! Cold, noisy, draughty, basically crap.

NiallRussell · Feb 5, 2020

Alpinewoodsman said:
I just used a picture I found on the interwebz that looked right, as mine is outside in the dark and snow and the camera is hiding....It does look like yours.

Hence the idea of replace whole door, or bodge in a lift handle on both sides one... it can't make the soundproofing, watertightness or thermal insulation any worse....

I rebuild my doors as I couldn't find a new one and I wanted to keep the lift up handle and tab system. It seemed to me that all the companys that did new door frames or skins did not do this type as it was not very common

Gmacz · Feb 5, 2020

https://forums.lr4x4.com/topic/68245-and-theres-me-thinking-you-could-get-any-spare-part-for-a-90/
Here is how to repair them.
Mine were all ok, I have never needed to touch them yet or really think about any repairs.

wireman · Feb 7, 2020

Is this any good to you?

https://www.ebay.co.uk/itm/164071271973

wireman · Feb 7, 2020

wireman said:
Is this any good to you?

https://www.ebay.co.uk/itm/164071271973

Now sold.

Replacing lift up handles...

Alpinewoodsman

Well-Known Member

Gmacz

Well-Known Member

nobber

Well-Known Member

nobber

Well-Known Member

NiallRussell

Well-Known Member

Gmacz

Well-Known Member

wireman

Well-Known Member

wireman

Well-Known Member

Similar threads