bjornebraten
Active Member
- Posts
- 196
Help!! bought a set of new doorhandles.Got a instruction how easy it is.I hve screw our three torx and taken the wire away,but i can`get the handle out of the door.Please help me!!!! EMERGENCY SOS!!
remove door handle
- Thread starter bjornebraten
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,479
bjornebraten
Active Member
- Posts
- 196
??? Have you done it before
- Posts
- 16,479
No Sorry....
jamesblake
Active Member
- Posts
- 419
- Location
- South East London - Croydon
When u unscrew the bolt, DO NOT remove it as there is a spacer washer on the other side that will fall off into the bottom of the door..... And u be very lucky to get it back!!
bjornebraten
Active Member
- Posts
- 196
Thats ok.But i hve removed the screw at the end of the handle + 3 other torx on the backside of the handle,removed the wire,and still i can`t get the handle out of the door
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
Thers 2 little clips that you have to push out from inside the door skin that hold the scratch guard behind the handle, unclip them (very easy push) then the whole thing comes out, also have you undone the one 10mm bolt inside the door skin and thers a second t25torx screw behind the top rubber bung on the side of the door
Last edited:
bjornebraten
Active Member
- Posts
- 196
Hi! I found the F...... Bl...... screw behind the window lift support Thanks to you all !
good night!
good night!
bjornebraten
Active Member
- Posts
- 196
Then were all the handles in it`s place.I think i buy some stainless scuff plates also.
Similar threads
Freelander 1
Tailgate door
