- Posts
- 11,023
- Location
- North of the Wall
@mick the builder Do you know what a marra is over there? 
Rebuilding my 90
- Thread starter GATSO
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
Lol, where I come from its a big squash like a pumpkin .@mick the builder Do you know what a marra is over there?
- Posts
- 11,023
- Location
- North of the Wall
Thought I'd ask when you liked the post.
It's a Geordie phrase for a friend. Really it's for a very close friend, but these days it gets used the same as you would say 'mate'.
The interpretation I was taught was that it was for someone who was as close to you as your bone marrow, abbreviated to marrow and in Geordie marra. The old Geordie words are falling out of use, but I like to chuck a marra in every now and then.
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
Around here it's the day after today.@mick the builder Do you know what a marra is over there?
but is prefixed with 'The'
Update done 700 miles in “THE GENERAL” chased a few diesel leaks all sorted now but the ‘mark one’ gear selector I made as a feasibility study to see if it could be done worked a treat but as I built it without seals it leaked (go figure) so made a new oil tight version happy days on a foot note anybody no the boost psi on a standard 300 as mine is running 16PSI regards gatso
Attachments
- Posts
- 11,023
- Location
- North of the Wall
Very clever
Absolutely thrashing mine to within an inch of its life,uphill, I can get 0.9 bar on my gauge. That's 13psi. Mine is taken off the back of the manifold.
Yeah mine too off manifold at 16psi pulls like a train loves 3rd and 5 on motorway with the 1.2. Disco transfer box lot of gear changes around town but they are a “drivers car”Very clever
Absolutely thrashing mine to within an inch of its life,uphill, I can get 0.9 bar on my gauge. That's 13psi. Mine is taken off the back of the manifold.
- Posts
- 11,023
- Location
- North of the Wall
Interesting. Yours is developing over 20% more boost than mine.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Mine is 20 psi off a tee on the wategate pipe.
It goes OK
Cheers
It goes OK
Cheers
Engine before rebuild inc turbo cam from a 50th anniversary edition disco wonder if they had a turbo tweek or po has been messing lol
- Posts
- 11,023
- Location
- North of the Wall
Aye, but yours is anything but standard.
You're just trying to wind me up about my sh@t turbo
If you don't pack it in I'll post that picture of my carb cleaner, just to mess with ya mind
- Posts
- 11,023
- Location
- North of the Wall
Ah, so you asked the question cos you suspected yours wasn't standard!
Yeah just thought tho mines off a t at the waste gate
