series 3 sweet 16
Active Member
- Posts
- 774
How easy is a rear cross member change on a 300tdi commercial discovery, ?? And how much is a cross member 
Rear crossmember
- Thread starter series 3 sweet 16
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 356
- Location
- Aberystwyth Mid Wales
YRM crossmember cost me about £165 which is more than some others advertised but it really is well made and better quality than a Bearmach one that I bought for a previous Disco.
How hard depends on how good you are with a welder and how much other rot you find when you cut the old crossmember out.
Also you need to brace the door opening to ensure it doesn't drop or warp. I welded some box section across and used two acrow props to keep it at the right height.
How hard depends on how good you are with a welder and how much other rot you find when you cut the old crossmember out.
Also you need to brace the door opening to ensure it doesn't drop or warp. I welded some box section across and used two acrow props to keep it at the right height.
