Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Why are there two different part numbers for the rear coil springs on the D2 facelift?
Disco 2 Rear Coil Springs
- Thread starter Shimsteriom
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Handed springs, you want one of each.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Thanks, what's different about each side?
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Usually drivers side slightly longer as vehicle often driver only so compensates for that.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Thanks 
Hellastony
Active Member
- Posts
- 244
- Location
- Essex and Pelion, Greece
See this from RAVE in relation to spring colours and fitment.
I believe that the different lengths only apply to front springs, according to RAVE.
Tony
I believe that the different lengths only apply to front springs, according to RAVE.
Tony
Hellastony
Active Member
- Posts
- 244
- Location
- Essex and Pelion, Greece
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
I've just checked the new springs I've ordered for the rear, and they are actually the same size (uncompressed), even though they both have differing part numbers as obtained from Allbrit - RKB101101 (RH) and RKB101100 (LH)See this from RAVE in relation to spring colours and fitment.
I believe that the different lengths only apply to front springs, according to RAVE.
Tony
