re-trimmed my gear gaitors,,, not bad

haighy2 · Jan 23, 2014

well after getting fed up of getting covered in "black bits" everytime I drive the disco, I decided to try some of the ebay gaitors,,, when they arrived I wondered what I had done as they didn't exactly look like a straight pull off , push on job,,, so after removing the old gaitors and gear knobs from the cab I realised it was a glue gun job,,, but all turned out not too bad and the new gaitors are apparently "Italian leather"
heres ow they look compared to old ones ..

how to capture screen

robhew86 · Jan 23, 2014

Look a tad tidier than the old ones....

One of those satisfying little jobs

haighy2 · Jan 23, 2014

road noise has been dramatically reduced aswell due to the old ones having rips in them

darrenm · Jan 23, 2014

I did mine last year they seem to be wearing very well

Teefin · Jan 24, 2014

Has anyone replaced the handbrake as well I have also done the above but stuck as to how to remove and recover the handbrake. Anyone assist.?

Pikey · Jan 24, 2014

Teefin said:
Has anyone replaced the handbrake as well I have also done the above but stuck as to how to remove and recover the handbrake. Anyone assist.?

It's held on by a rubber cock ring where it joins the hand brake handle. and just unclips from the console

darrenm · Jan 24, 2014

Yes mine is a auto so did handbrake to low box

haighy2 · Jan 24, 2014

im doing handbrake on Tuesday when the gaitor arrives

Teefin · Jan 24, 2014

Pikey I take it you just prise the handbrake base from the centre console, it just seemed very tight and didn't want to break clips?

Albjames · Jan 24, 2014

Nice job there
I also just got the set of three I have done the main gear stick looks nice
What glue did you use?
Cheers
James

haighy2 · Jan 24, 2014

I used the old trusty glue gun

Pikey · Jan 25, 2014

Teefin said:
Pikey I take it you just prise the handbrake base from the centre console, it just seemed very tight and didn't want to break clips?

Yes and yes they are tight. but a bit of gentle persuasion usually does the trck

Teefin · Jan 25, 2014

Thanks will have a go on days off

chrispy · Jan 25, 2014

Been meaning to do this myself but want it done in the cream colour to match my seats etc. Still can't find them the right colour so may have to do it in it's original black.

haighy2 · Jan 25, 2014

message topgaitors on ebay, they have been very helpful so far

haighy2 · Jan 25, 2014

well with the weather been so crap outside and the fact the handbrake gaiter turned up this morning I thort id change it, heres a few pics for teefin regarding removing the old gaiter and lever
its held in at the base with a metal spring clip design

image search

and onto the actual grip with this rubber o'ring

take screen shot

I removed the handle by just twisting from side to side and pulling forward, and heres the old vs new, all in all a 15 min job

taking a screen shot

Teefin · Jan 27, 2014

Got it completed today, thanks for the pics and advice. I managed to leave console intact and just remove old gait or also leaving gear lever handle in place. Re trimmed the wire frame and re fitted in place removal 3 mins re fit 5 and the time in the middle was waiting for glue to cure. Looks much better now.

ClassikFan · Feb 8, 2014

Thanks for the pics haighy2. Helped me fit a new gaiter to my handbrake lever. Looks smart now. Previous owner had done the other 2 so now I have a matching set. Good deal for real leather from VOLKSWAGON, VAUXHALL OPEL items in TOP GAITERS BOOTS store on eBay!

Seat heater element next on the list - might be a bit harder!

rob8647 · Feb 8, 2014

Easy isn't it!

Teefin · Feb 20, 2014

Here's the finished article. Well chuffed

re-trimmed my gear gaitors,,, not bad

New Member

Well-Known Member

New Member

Active Member

New Member

Dummy Ejection Facilitator..

Active Member

New Member

New Member

Member

New Member

Dummy Ejection Facilitator..

New Member

Active Member

New Member

New Member

New Member

Active Member

New Member

New Member

Similar threads