Rave directions please folks

JD · Jun 7, 2011

Hi folks,

Thought I had a leaking caliper but after changing the rear diff oil I noticed a nice puddle under the wheel, guessing it's the half shaft oil seal?

Might be being dense but I can't find any section in rave for the hub assembly only the diff assembly, anyone tell me if there is a section that covers this?

Cheers.

dougdotcom · Jun 7, 2011

Hub and Wheel Bearing Replacement (Range Rover 4.0/4.6/P38)

Any good?

jamesmartin · Jun 7, 2011

not the best guide ,you cnt whack disc with hammer and refit,the most difficut part is removing brg from hub and retting,using sockets and press and supporting the right parts

JD · Jun 8, 2011

Cheers for the link doug, will pull the hub off and replace the seal...The bearing isn't noisy so hopefully it won't need replacing!

kooky_guy · Jun 8, 2011

It's under Section 64 in my copy of Rave.

Range Rover Workshop Manual - Volume 2
64 - Rear Suspension - Electronic Air Suspension -> Repair -> Drive Shaft and Hub Assembly

Not much info on the seal itelf, but it describes the disassemly and refit.

Guy

Rave directions please folks

JD

New Member

dougdotcom

Active Member

jamesmartin

Well-Known Member

JD

New Member

kooky_guy

Well-Known Member

Similar threads