Radius arm bush replacement question

m4drx · Mar 31, 2014

Hi Guys,

I need to change my radius arm bushes but I have a question;

Is it possible to change the arm to chassis bushes without removing the entire arm? I'm guessing not.

If not, do i need 4 bushes for arms to chassis and 6 for arm to axle if doing both front and back?

Kwakerman · Mar 31, 2014

If you are talking about not disconnecting the arms from the axle then theoretically you can by moving the whole axle to free the arm/chassis bushes but that would be a lot of hassle! As for what bushes you need look at Pro-flex website and that should give you an idea.

Grimmer · Mar 31, 2014

Flo-Flex Polyurethane Limited

Flo-Flex Polyurethane Limited

Or somert like that

Obviously assuming it's a Fender

m4drx · Mar 31, 2014

thanks for the replies guys.

It's a disco 1 and as its an off roader and i'm selling, I think rubber will be ok. Poly isn't going to add any value to the car and it will probably end up getting trashed by the new owner anyway and scrapped or something

Grimmer · Apr 1, 2014

m4drx said:
thanks for the replies guys.

It's a disco 1 and as its an off roader and i'm selling, I think rubber will be ok. Poly isn't going to add any value to the car and it will probably end up getting trashed by the new owner anyway and scrapped or something

Poly is a damn sight easier to fit on your drive though

, even I managed it

kes86 · Apr 1, 2014

Just don't buy the Brittpart rubber bushes, mine lasted 8 months and are now nearly as cracked as the set I took off. Thinking of poly bushes instead.

m4drx · Apr 2, 2014

if I just want to do the rears, is this kit right?
LAND ROVER DISCOVERY 1 1989-1998 REAR SUSPENSION TRAILING ARM CHASSIS BUSH KIT | eBay

I guess i need one for each side or perhaps this kit

LAND ROVER DISCOVERY 1 REAR RADIUS ARM TRAILING ARM BUSH KIT | eBay

although it doesnt include nuts or bolts.

the_wolf · Apr 2, 2014

I'm doing mine this weekend. They have polybushes in so should be a piece of **** to get out. Whole arm will be coming off and new original Land Rover bushes pressed in with a vice. Got LR bushes for the rear too. Weren't very expensive and I'd rather pay extra for something that will last and probably give a damn better ride than the polys

m4drx · Apr 2, 2014

i think i'll go with the below as its only the rears that really need doing right now and it's both an off roader and going to be sold, probably to someone who will kill it off roading shortly anyway.

LAND ROVER DISCOVERY 1 REAR RADIUS ARM TRAILING ARM BUSH KIT | eBay

Does anyone know where I can get the right nuts & bolts?

jai_landrover · Apr 4, 2014

Mad I can press the old ones out and new ones in for a few beers I even have spare arms so your motor isn't off the road re poly bushes I'm not a big fan others like then but I had some polys (not genuine poly bush tho) and they lasted 6 months

m4drx · Apr 9, 2014

jai_landrover said:
Mad I can press the old ones out and new ones in for a few beers I even have spare arms so your motor isn't off the road re poly bushes I'm not a big fan others like then but I had some polys (not genuine poly bush tho) and they lasted 6 months

thank you for the offer Jai. Going to order the parts asap and I'll give you a shout.

Just trying to find new nuts and bolts. Only going to the rear trailing arms but my bolts look a little suspect and will probably need cutting off I rekon.

Radius arm bush replacement question

m4drx

Active Member

Kwakerman

Well-Known Member

Grimmer

THE Winner

m4drx

Active Member

Grimmer

THE Winner

kes86

Active Member

m4drx

Active Member

the_wolf

Well-Known Member

m4drx

Active Member

jai_landrover

Well-Known Member

m4drx

Active Member

Similar threads