pulling my hair out. smokey freelander

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
already done. I only have it on the air setting at the moment. When I put the map on it smokes even more. Probably compounding the underlying problem.
 
You tried running without the tuning box switched on at all?

The tuning box exaggerates ANY problems I found. Took me 6 months to sort mine out. It was the injectors in my case causing the smoking.
 
Yep, done that as well. The technician said that it is not the injectors.It was hooked up to landrover diagnostics and it only picked up the MAF and fuel pressure sensor.
 
just been speaking to Rover Ron, great bloke and very helpful. He suggested that it is not a fuel issue i.e over fueling but an air issue i.e lack of air to burn the fuel. He suggested that I check the turbo boost actuator wires(where is this) and check the turbo boost pressure. Any idea how to do this and where on the engine am i looking?

Cheers.
 
tyronemullarkey said:
just been speaking to Rover Ron, great bloke and very helpful. He suggested that it is not a fuel issue i.e over fueling but an air issue i.e lack of air to burn the fuel. He suggested that I check the turbo boost actuator wires(where is this) and check the turbo boost pressure. Any idea how to do this and where on the engine am i looking?

Cheers.
Click to expand...

Turbo boost actuator is under neath the car. Under the driver foot well area. It's attached to the turbo. If you're ever near Ampleforth, I have an obd tool to check boost pressure. My Td4 spikes to 18.8psi then drops to 17psi in third gear on beacon bank. Just message me on here if you want to see what boost pressure you're achieving. That may give you a better idea of where to look.

Dan
 
Hi Dan,
cheers for the offer, I might just take you up on that as I am only 1/2 hour from you. Thanks for letting me know where the actuator is, I will have a poke around tomorrow. This problem is really annoying me now, I cannot believe that a Landrover specialist cannot find the issue.
 
tyronemullarkey said:
Hi Dan,
cheers for the offer, I might just take you up on that as I am only 1/2 hour from you. Thanks for letting me know where the actuator is, I will have a poke around tomorrow. This problem is really annoying me now, I cannot believe that a Landrover specialist cannot find the issue.
Click to expand...

But are they a Freelander specialist - quite different!!!!
 
sorry to hear of your woes

can i suggest that you actually completely disconnect the synergy box and see how it runs.

that way you can maybe see if there is a fundamental problem with the car.
It may also let you find any bad connections in the synergy connections that could be contributing to your problem.
 
Hi digby,
yep, already done that to. Got a brand new Bosch MAF, disconnected the synergy so everything was back to original. It ran like a bag of spanners, just like when the MAF is shot. Put my Piersburg MAF and synergy back on and it runs sweet as a nut but still had the black smoke. When the Bosch MAF didnt work I thought that it was the MAF plug at fault do Rover Ron pointed out that that cant be the case as my Piersburg MAF and synergy box would not work.
 

Attachments

  • 20140722_104753.jpg
    20140722_104753.jpg
    377.5 KB · Views: 219
  • 20140722_104643.jpg
    20140722_104643.jpg
    289.3 KB · Views: 253
There is a turbo hose off the turbo too, has that been checked for splits or collapse internally? You can see the actuator rod from drivers side wheel arch. Put wheels in full left lock look through a rear side of the arch with a torch. You will see the solenoid valve then the top of the rod just above that. Get someone to start the car and it should move slightly. Then get them to blip the throttle and the rod should move. They only move circa 10mm travel when working properly.

Your truck looks smart by the way.
 
did you install the fuel pressure sensor ???

maybe you should check the boost pressure - if you are short of air this will show it up - any simple OBD ready should let you monitor boost pressure.

you will have to do it on the road though - full right foot in 2nd or 3rd should give max boost
forget now what is max boost pressure but somebody here will know or maybe its in RAVE ????
 
Dj4man said:
There is a turbo hose off the turbo too, has that been checked for splits or collapse internally? You can see the actuator rod from drivers side wheel arch. Put wheels in full left lock look through a rear side of the arch with a torch. You will see the solenoid valve then the top of the rod just above that. Get someone to start the car and it should move slightly. Then get them to blip the throttle and the rod should move. They only move circa 10mm travel when working properly.

Your truck looks smart by the way.
Click to expand...

That's what I am going to look at tonight. Thanks for the comment on the truck. Its the first 4x4 that i've owned and other than this issue, I love it.
 
digby said:
did you install the fuel pressure sensor ???

maybe you should check the boost pressure - if you are short of air this will show it up - any simple OBD ready should let you monitor boost pressure.

you will have to do it on the road though - full right foot in 2nd or 3rd should give max boost
forget now what is max boost pressure but somebody here will know or maybe its in RAVE ????
Click to expand...

Hi digby,yes I did put on a new fuel pressure sensor also fitted the overlay harness for good measure. It made a slight improvement but nothing to write home about.
 
I would certainly be looking at the boost pressure, low pressure will cause it to smoke, it could even be a blockage in the exhaust not letting the turbo spool up properly.
 
You must log in or register to reply here.

Similar threads

spacebrodie
Freelander 2 (LR2) Cut out - P0045-19
Replies
6
Views
659
Arctic2
Arctic2
DiscoPingu
CANBus issue possibly?
Replies
13
Views
1K
Graculus
Graculus
A
Freelander 2 p007a
Replies
10
Views
6K
matty190973
M
Han2677
Pulling my hair out
2
Replies
26
Views
2K
Han2677
Han2677
A
Series 2a gearbox strip down, advice needed
Replies
4
Views
1K
Wildefalcon
W
Back
Top