Prop spacers

Lewis282 · Feb 8, 2015

Lifted the disco 2" and now theres a vibration at around 30 - 40mph
When researched on here I found its the prop.
My question is do I need to fit spacers to just one prop or both ? as I cant afford wide angle props at the moment but the M.O.T is in 2 weeks !

cheers

fanatic · Feb 9, 2015

Disco 2 front prop and flange for transfer front output

tetsu0san · Feb 9, 2015

I doubt that the vibration will be an MOT issue as they don't take it up the road.

But get it sorted as it will eat the UJ's. As said above a double decardon prop from a Discovery 2 will allow for the increased angle from the transfer box to the front axle.

Mr Noisy · Feb 9, 2015

Find the real cause though, everybody lifts 2" and does not get vibration...

robbh · Feb 9, 2015

Mr Noisy said:
Find the real cause though, everybody lifts 2" and does not get vibration...

^^^ agreed.

Mines been lifted 2" (soon to be 4") for about 6 months, only time I've had a vibration when a uj was on its way out. Swapped it for a newun and all is good.

Prop spacers

Lewis282

Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

tetsu0san

Active Member

Mr Noisy

Coming in your ears.

robbh

Crazier than a box of frogs on acid

Similar threads