Project Rusty.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
builtnotbought.jpeg


About sums up my efforts with my D1 :D:D:D
 
Went out with the lads for a day's green laning, had an awful lot of fun, sustained a bit of damage and we were defeated by one lane, but it was a hoot :D

Our little brew stop atop the Devils punch bowl.


IMG_20180304_132418.jpg


Smashing little thing this, little and light, just what the doctor ordered.

IMG_20180304_132437 (1).jpg


Bit tight and it was a bit of an axle twister with some very steep side slopes.

IMG_20180304_140852 (1).jpg


Rustysideslope.JPG


Took me some footage to show what it was like from the cab.



And Mrs. Dieseldog even managed to video me from up on the high ground, the video doesn't do it justice I think.



This was the lane that defeated us and the lads looking over the tricky bit that cross axled the 90.

IMG_20180304_161159 (1).jpg


IMG_20180304_161024.jpg


Seems that a bit of digging on that lane reveals it has defeated a good number of people and needs a bit of repair, nothing a few blokes with pick axes and shovels couldn't fix up or at least make it passable again.

Sustained a bit of damage too :(

Wing mirror was removed by a telegraph pole that was very tight on a hole in the lane.

IMG_20180304_180127.jpg


Dented me door and a few scrapes on the side where I slid into the gulley washout.

IMG_20180304_180122.jpg



Rusty040318sidescrapes.JPG


Rustylightguardgrader.JPG


But it was a brilliant day out, waffle boards ordered and I've got a new fibreglass handled pick axe and a long handled spade coming from work too.

Looking forward to the next outing and hoping that we can grad a few more of the other lads out to play too.
 
I could be busy this weekend.

Timing belt kit.

IMG_20180308_071624.jpg


Also in the package was a nice new tensioner pulley and a new idler pulley, along with new crank oil seals for inner & outer sides of the timing case, I've got a cam inner timing case seal in my stores too so will pop the whole timing chest off for new seals and gaskets while I'm in there.

IMG_20180308_073252.jpg


And a proper Dayco timing belt.

IMG_20180308_073321.jpg


Also my genuine Land Rover 200Tdi oil thermostat turned up too and I got an O ring for the housing.

IMG_20180308_071731.jpg


Now compare new to old, both were cold at the time!

IMG_20180302_163449.jpg


Old one sticks out a 1/4" and was letting the oil strait to the cooler, not ideal as warming it raises the viscosity of a multi grade oil, but my oil pressure gauge shows 30psi at hot tick over and 55-60psi cold, normal running with moderate engine speed is 40 to 45psi running 0.7 BAR of boost by the gauge, might up that a little but it is absolute manifold pressure after the expansion of the intercooler and intake manifold so I'm not in any hurry to start tweeking it yet.

This will also be the start of fitting the Gwynn Lewis second alternator mount and my second alternator set up on Rusty too :)
 
That off roading you did looks like jolly good fun. Plus if you break something while off roading it just gives you another excuse to fix something on your landy :D The most mine has ever seen is a few fields and farm tracks never anything as extreme as that. Bit too scared of denting it.
 
That off roading you did looks like jolly good fun. Plus if you break something while off roading it just gives you another excuse to fix something on your landy :D The most mine has ever seen is a few fields and farm tracks never anything as extreme as that. Bit too scared of denting it.

Great fun, little bit of damage is no big drama on a full size truck like a Discovery or Range Rover, the dents and scrapes serve as reminders of the fun you've had and the journeys you've been on.

When I took on the rebuild it was planned to make it the perfect off road vehicle that could travel long distances and haul a load in comfort whilst tackling some of the roughest terrain, this is what it was built for, no great pampering and polishing it every Sunday, you gotta drive it and love every minute of driving it.
 
battle scars. each one has a story behind it :)

Oh yeah! Could so easily have been me replacing a smashed rear alpine light though, that telegraph pole had you guys not hung off the back corner :D It was rather close to the roof :eek: Mind you though there were a few trees on another lane that were also quite close too.
 
Where about's were those lanes matey? That looks super fun, I want to give that bit a go that defeated you all. I like a challenge!

Loving the project though. Don't worry about the rust, it wouldn't be a genuine Land Rover without it.
 
Where about's were those lanes matey? That looks super fun, I want to give that bit a go that defeated you all. I like a challenge!

Loving the project though. Don't worry about the rust, it wouldn't be a genuine Land Rover without it.

Cheers :) Been a labour of love this thing, plenty of blood, sweat and tears, welding burns and empty bank accounts lol

Oakshott I think it was
oakshottmap.png


Not silly far from Kent, just depends where in Kent you are?
 
Back
Top