power steering conversion for ex-MOD Defender 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I

Ioan MacRae

New Member
Posts
6
Location
Reading
Hi
I have a 1994 Defender 110, with a 2.5 diesel NA. i want to convert to power steering and looking for advice on where i can purchase the required parts (pump, pipes, reservoir, new steering box, etc...)
any advice would be most welcomed.
many thanks
Ioan
 
I'm surprised your 1994 110 hasn't already got PAS. To do, you'll need flow and return hydraulic hoses, PAS pump and mounting bracket, PAS drive belt to attach to crank front pulley and possibly a new pulley. See here for PAS components for ref' https://www.lrworkshop.com/diagrams/land-rover-defender-steering/steering-column-lower

Subject to your existing steering box type/model, choose a suitable model year to base the PAS components req'd. Where a std 2.5n/a engine it would make sense to base this on early Defender/1987 onwards. Though both early and later systems are near identical.
 
When I converted my ex-MOD 1986 2.5NA D to PAS back in the day (Y2K I think?) I bought a full SH kit from one of the stalls at Billing, much easier to buy the whole kit take-off as you know everything is there.
I recall people often commented that they were buying parts separately (some new and others SH) and while the box, pipes, pump, reservoir etc were easy enough to source they were struggling with the bottom pully & pump bracket as they were either difficult to find or very expensive.
 
Ex military 110? Quite possible that the bottom pulley will have the extra grove for the power steering . All my bits came from Newbury show ground the most difficult part was the pump bracket
 
Hello. I am in the USA and have a 1986 Land Rover 110, former MOD. I'd like to know how to convert my LR to power steering. Is there a parts list and sources in the UK or USA?
 
Welcome to Landy Zone. Note you're in Jenner-on-Sea, CA...I was based in Walnut Creek many years ago, NrthCal/Jenner is a cracking area to live.

Your best bet is to study the https://www.lrworkshop.com/diagrams/land-rover-defender-steering/steering-column-lower components. You will need the following:

  • Flow & return hydraulic lines
  • Power Steering Pump & Pulley
  • Power Steering Pump Bracket
  • 2 or 3 Groove Crank Pulley
All of the parts are readily available, but be careful where you buy from as some suppliers are very expensive[!] LRWorkshop is great because it searches the most relevant suppliers + links to eBay vendors [not always the best priced] + it would be really worth getting in contact with Mike at Britannica Restorations in Canada. He's a font of all knowledge and may have parts in stock he could sell to you https://britrest.com/ + Mike has a good video here on power steering it shows the primary components.

 
You must log in or register to reply here.

Similar threads

C
Td5 steering issue
Replies
5
Views
850
Corris110SW
C
B
Freelander 2 power steering
Replies
4
Views
1K
Stv123
Stv123
Gabby1971
changing the gearbox
Replies
6
Views
1K
300bhp/ton
300bhp/ton
M
Pump to the steering box pipe
Replies
4
Views
847
mma59
M
P
Power steering issue
Replies
12
Views
1K
Arctic2
Arctic2
Back
Top