please help
- Thread starter the rig
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ok I have a 95 disco 3.9 v8, wich was traped in a flsh flood. water everywhere. I changed the oil, transmition fluid and gas(petrol), removed the plugs and blowed out the pistons. should I do anything else or try to start it?? thanks Jay
RAZ8550TDI
New Member
- Posts
- 3,573
- Location
- liverpool
make sure there is no water sitting in the air intakes also. give everything a good quirt with some wd40.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
probably not but i'd be concerned about relays and other electronic stuff. it might be an idea to open any lectronics stuff and give if a blow job from a hair dryer. although there is a chance tha any leccy boxes that have got wet will be fooked
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
leccy box.. ecu and any thing that deals with that black magic known as electronics. even a damp spot in em can stop them working. if it bin submerged in water the joints might be gubbed. have you tried going straight from battery to starter incase its something simple like the strater circuit
